Technical data

13773-001
5-20
Page 3
Note: All references to “5-20” under the Chap-Sect column are to be understood as reference to Visual
Inspection criteria defined above under Inspection Groups and Criteria.
Scheduled Inspection Report
Make
Cirrus Design
Model
SR22
Serial Number Registration Number
Owner Date
Type of Inspection Hobbs Time
Pre-Inspection
Chap-Sect
Reference
Interval
100 Special
Initials
1. Review compliance status with current Federal Aviation Regula-
tions. This includes inspection of the following:
- Airplane Flight Manual
- Aircraft Log Book
- Registration Certificate
- Weight and Balance Record
- FAA Airworthiness Directives
- Cirrus Design Service Documents
- ❍ Annual
2. Airplane Interior
Clean and vacuum.
12-20 ❍
3. Fuselage and Empennage
Clean.
12-20 ❍
4. Engine and Engine Compartment
Remove engine cowling and clean.
71-10
12-20
❍ 50 Hrs
5. Engine Operational Inspection
Perform an Engine Operational Inspection in accordance with Tele-
dyne Continental Motors Maintenance Manual, Section 5.
Manual No.
X30634A
50 Hrs
6. Operational/Functional Check
Perform an airplane run-up in accordance with Operational/Func-
tional Check in 5-30. Make a record of all malfunctions and abnor-
malities for reference during the inspection. After completing the
Operational/Functional Check, perform a walk around to detect fluid
leaks or other abnormalities.
5-30 ❍
7. - Remove Landing Gear Fairings.
- Remove Cabin Seats.
- Remove Cabin Carpet.
- Remove Cabin Access Panels.
- Remove Wing Access Panels LW1, LW2, LW4, LW5, LW6, LW7,
LW8, LW9, LW12, LW13, LW14, LW15, and RW1, RW2, RW4,
RW5, RW6, RW7, RW8, RW9, RW12, RW13, RW14.
32-00
25-10
25-10
6-00
6-00
❍
31 July 2001