Technical data

13773-001
5-20
Page 4
Engine Group
Chap-Sect
Reference
Interval
100 Special
Initials
1. 25 Hour Inspection
After first 25 hours of operation on new, rebuilt, or overhauled
engine, perform complete 100-Hour Engine Inspection in accor-
dance with Teledyne Continentals Motors Maintenance Manual,
Section 5.
Manual No.
X30634A
1st 25
Hrs
2. Engine Cowling
Visual Inspection for cracks, distortion, and loose or missing fasten-
ers.
5-20 ❍
3. Engine Oil
Drain and change every 100 hours and after first 50 hours or 6
months of operation on new, rebuilt, or overhauled engine.
12-20 ❍ 1st 50
Hrs or
6 Mnths
4. Oil Screen
Remove and perform Visual Inspection for metal particulates.
5-20 ❍
5. Oil Sump Plug
Visual Inspection for condition.
5-20 ❍
6. Oil Filter
Open and perform Visual Inspection for metal particles every 100
hours and after first 50 hours or 6 months of operation on new,
rebuilt, or overhauled engine.
12-20 ❍ 1st 50
Hrs or
6 Mnths
7. Oil Lines and Fittings
Visual Inspection for leaks, security, chafing, dents, and cracks
every 100 hours and after first 50 hours or 6 months of operation on
new, rebuilt, or overhauled engine.
5-20 ❍ 1st 50
Hrs or
6 Mnths
8. Oil Cooler Fins
Clean and perform Visual Inspection for cracking, bending, and gen-
eral condition.
5-20 ❍
9. Battery
Perform Electrolyte Level Check.
12-10 ❍
10. Battery Platform, Terminals, and Cables
Visual Inspection for security, corrosion, and general condition.
12-10 ❍
11. Wiring
Visual Inspection for damaged wiring and clamps.
5-20 ❍
12. Engine Compression
Functional Inspection in accordance with Teledyne
Continentals Motors Maintenance Manual, Section 19.
Manual No.
X30634A
❍
Cyl #135246
P. S . I .
31 July 2001