Technical data

13773-001
25-10
Page 731 Jul 2001
(15) Removal - Interior Door Trim
(a) Remove the bolt and washer securing the door handle to the door. Remove door handle.
(b) Remove the screws securing the trim to the door.
(c) Gently lift the corner of the door trim and slowly release the hook and loop fasteners, and
remove door trim.
(16) Installation - Interior Door Trim
(a) Place trim into position and firmly push down on trim in areas of hook and loop fasteners.
(b) Secure trim with screws.
(c) Place door handle into position and secure with bolt and washer.
(17) Removal - Left Mid Console Circuit Breaker Trim
(a) Lift forward edge of the Alternate Static Source cover plate and slowly release the hook
and loop fasteners. Remove cover plate.
(b) Remove screws securing the Left Mid Console Circuit Breaker Trim and remove the trim.
(18) Installation - Left Mid Console Circuit Breaker Trim
(a) Place Left Mid Console Circuit Breaker Trim into position and secure with screws.
(b) Place Alternate Static Source cover plate into position and firmly push on trim in areas of
hook and loop fasteners.
(19) Removal - Right Mid Console Trim
(a) Remove the screws securing the trim and slowly remove the trim.
(20) Installation - Right Mid Console Trim
(a) Place trim into position and secure using screws.
(21) Removal - Right Aft Console Lower Panel
(a) Remove co-pilot seat. (Refer to 25-10)
(b) Remove screws securing the Right Aft Console Lower Panel. Remove panel.
(22) Installation - Right Aft Console Lower Panel
(a) Place panel into position and secure with screws.
(b) Install co-pilot seat. (Refer to 25-10)
(23) Removal - Left Aft Console Lower Panel
(a) Lift forward edge of trim and slowly release the hook and loop fasteners. Remove trim.
(24) Installation - Left Aft Console Lower Panel
(a) Place trim into position and secure. Firmly push on trim in areas of hook and loop fasten-
ers.
(25) Removal - Center Armrest Console
(a) Open Center Armrest Console and remove the screw, washer, lanyard, and spacer from
the armrest.
(b) Remove armrest mounting screws and remove armrest.
(26) Installation - Center Armrest Console
(a) Place Center Armrest Console into position and secure with screws.
(b) Secure armrest lanyard with screw, washer, and spacer.
(27) Removal - Aft Console Rear Cover
(a) Remove the screws securing the Aft Console Rear Cover to the center console.
(28) Installation - Aft Console Rear Cover
(a) Place cover into position and secure with screws.