Technical data

13773-001
25-50
Page 1
BAGGAGE AREA
1. DESCRIPTION
This section covers the cargo floor carpet, anchor plates, and trim panels that are located directly behind
the passenger seats.
2. MAINTENANCE PRACTICES
A. Anchor Plates
(1) Removal - Anchor Plates
(a) Remove carpet from cargo compartment. (Refer to 25-10)
(b) Remove access panel CF5. (Refer to 6-00)
(c) Remove the bolts, nuts, and washers securing the anchor plate to the floor.
(2) Installation - Anchor Plates
(a) Place anchor into position and secure with bolts, washers, and nuts.
(b) Secure access panel CF5. (Refer to 6-00)
(c) Clean floor surface and the hook and loop fasteners using a whisk broom and a vacuum
cleaner.
(d) Place carpet back into position and secure by pressing down firmly on the areas of the
hook and loop fasteners.
B. Aft Headliner
(1) Removal - Aft Headliner
(a) Remove screws securing headliner to fuselage.
(b) Lift the upper corner of the rear headliner panel and slowly pull the hook and loop apart
from the cabin headliner. Remove rear headliner interior trim panel.
(c) Remove aft headliner.
(2) Installation - Aft Headliner
(a) Install aft headliner and secure with screws.
(b) Place adjoining trim panels into position and press down firmly on the areas of the hook
and loop fasteners.
C. Aft Interior Trim Panels
(1) Removal - Aft Bulkhead Trim Panel (Refer to 6-00)
(a) Remove interior trim panel from the aft bulkhead by gently pulling it forward to release the
hook and loop fasteners.
(2) Installation - Aft Bulkhead Trim Panel (Refer to 6-00)
(a) Secure trim panel to aft bulkhead and press down firmly on areas of hook and loop fasten-
ers.
(3) Removal - Baggage Door Interior Trim Panel
(a) Remove screws securing interior trim panel to baggage door.
(b) Lift corner of baggage interior trim and slowly pull the hook and loop apart.
(c) Remove baggage door interior trim panel.
(4) Installation - Baggage Door Interior Trim Panel
(a) Place panel back into position and secure by pressing down firmly on the areas of the
hook and loop fasteners.
(b) Secure interior trim panel with screws.
D. Floor Covering
(1) Removal - Floor Covering
31 Jul 2001