Technical data

13773-001
32-10
Page 2 31 July 2001
(2) Installation - Main Gear Fairing
Note: To ensure clearance between wheel assembly and fairing assembly, finger tighten
all attaching parts and adjust fairing assembly before final tightening.
(a) Pry trailing edge seam of upper strut fairing open, position around strut, and install screws
attaching upper strut fairing to wing.
(b) Pry trailing edge seam of strut fairing open, slide fairing into position under upper strut fair-
ing, and install screws securing fairing to strut.
Note: To facilitate proper installation, adjust wheel assembly attach brackets if
necessary.
(c) Position wheel fairing around wheel assembly and strut fairing, and install screws securing
fairing to wheel assembly upper attach bracket.
(d) Install washer and bolt securing fairing to axle.
(e) Position access panel to fairing and install screws.
(f) Loctite and install screw securing access panel to lower attach bracket. (Refer to 20-40)
(g) Adjust wheel fairing as required for clearance between tire and wheel pant.
(h) Final tighten all attaching parts.