Technical data

13773-001
32-20
Page 2 31 July 2001
(h) Reinstall towing lug.
(2) Installation - Nose Gear Fairing
(a) Acquire necessary tools, equipment, and supplies.
(b) Remove towing lug from nose wheel assembly.
(c) Turn nose wheel to full 108 degree deflection.
(d) Pry trailing edge seam of strut fairing open and position strut fairing around strut.
(e) From bottom of strut fairing, insert and slide hinge pin into hinge bodies until hinge pin is
fully inserted and seated.
(f) Secure hinge pin to strut fairing with safety wire.
(g) Install screws attaching strut fairing to nose strut and apply Loctite. (Refer to 20-40)
(h) Place forward shell in proper alignment with wheel assembly and install screws.
(i) Insert upper shell plate in forward shell slot.
(j) While supporting upper shell plate, place rear shell in proper alignment with forward shell
apply light force to mate the pant shells together.
(k) Install screws along nose pant seam and upper shell plate.
(l) Reinstall towing lugs.
(m) Rotate nose wheel assembly to ensure there is no interference through caster travel.
Description P/N or Spec. Supplier Purpose
Safety Wire - Any Source Secure hinge pin