Technical data

13773-001
39-10
Page 330 Nov 2000
B. Circuit Breaker Panel
(1) Removal - Circuit Breaker Panel
CAUTION: The External Power Receptacle must be disconnected during the following proce-
dure.
(a) Disconnect battery. (Refer to 24-30)
(b) Remove the screws securing the circuit breaker panel to the hinge and console. (Refer to
24-50)
(c) Identify and disconnect all wire terminal connectors. Remove the circuit breaker panel.
(2) Installation - Circuit Breaker Panel
(a) Place the circuit breaker panel into position and connect all wire connectors.
(b) Secure the circuit breaker panel to the console with screws.
(c) Connect battery. (Refer to 24-30)