Technical data

13773-001
51-20
Page 2730 Nov 2000
A. Preparation for Repair
(1) Acquire necessary tools, equipment, and supplies.
Description P/N or Spec. Supplier Purpose
Borescope 6592T12 McMaster-Carr Inspect damage
Compressed air (Contaminate
free)
N/A Any Source General repair
Liquid dish soap N/A Any Source General cleaning
Isopropyl Alcohol TT-I-735 Grade A
or B
Any Source General cleaning
Orbital Sander 39825A12 McMaster-Carr Prepare repair surface
Masking Tape 2-inch Any Source Limit repair area
Permanent Marker Sanford Ink Co. Any Source Identify repair area
Micrometer 0-1inch Any Source Measure laminate
thickness
Release Film WL5200 (Red or
Blue)
AIRTECH Int’l Inc. Protect lay-up surface
Peel Ply Stitch Ply G AIRTECH Int’l Inc. Makes a smooth and
contaminate free repair
surface
Glass Repair Fabric 7781-F16 Hexcel Repair composite
structures
Devcon Epoxy 5 Minute Devcon Temporarily hold back-
ing plate
Clecos or Small Screws N/A Any Source Secure backing plate
Plastic Sheet N/A Any Source Make template of
repair ply
Structural Resin Repair System MGS L418/418 MGS Bond plies over punc-
ture
Sandpaper 120-grit or finer Any Source Paint and primer
removal
Sandpaper 60 to 80-grit gar-
net or aluminum
oxide
Any Source Abrade bonding sur-
faces
Rigid Closed Cell Foam HT70 Divincell Stiffen laminate
Aerosil 200 Degussa Resin filler
Sil-Cell Sil-32 Silbrico Resin filler