Technical data

13773-001
61-10
Page 930 Nov 2000
WARNING:
Finish coatings are flammable and toxic to the skin, eyes, and respira-
tory tract. Skin and eye protection is required. Avoid prolonged con-
tact. Use in well ventilated area.
CAUTION: Apply finish coating only to the degree required to uniformly cover the
repair/erosion. Avoid excessive paint build-up along trailing edge to avoid
changing blade profile.
(g) Apply the appropriate finish coat to achieve 2 to 4 mils (0.51 - 0.10 mm) thickness when
dry. Re-coat before 30 minutes or after 48 hours.
(h) Optionally, perform dynamic balancing in accordance with procedures and limitations
specified in Hartzell Standard Practices Manual 202A. (List of Publications)