Operating instructions

Attach the cam for the limit position to the copy-
grinding plate as shown in Fig. 8-5.
The cam defines the end of travel and triggers
the movement in the opposite direction.
If the cam for the limit
position is not attached,
the copy-grinding plate is
moved down from the
guide carriage and may
fall and be damaged.
Insert the knife in the copy-grinding plate and
lock the knife with the lever.
39
8. OPERATION
Fig. 8-5 Cam for limit position
Fig. 8-6 Clamp knife
3
2
1
Sharp knife edge. Serious
injuries are possible.
CAUTION
IMPORTANT