Technical data

Configuration M203
2
Connection:
M203 with M51/ M219
Socket: M51 LINK IN
Setup: -
M219: Yes ;
The M203 interface is connected
with the M51 LINK socket on the
back of the M51 or the M219
LINK socket on the Side room
amplifier, using the supplied
telephone cable.
If you want to use a different
cable, you should only use a
non-crossed, 4-core telephone
cable with an RJ11 plug (6P4C
modular).
Max. cable length: 100 m
Max. cable resistance: 0.1 Ω /m
Connection
:
M203 with external interfaces
Socket: M51 LINK OUT
Setup: -
M219: Yes ;
The M203 interface is designed
for the connection of further
external interfaces:
M51 operation
Currently, the following further
products can be connected with
the M51::
 M200 Domotic interface
 M201 IR interface
 M202 Ethernet interface
 M203 (2. Interface)
 M217 Display
M219 operation
With the M219, the LINK OUT
can be used for the connection
of an M217 Display.
Use a non-crossed, 4-core
telephone cable with an RJ11
plug (6P4C modular).
Max. cable length: 100 m
Max. cable resistance: 0.1 Ω /m