Instruction manual

MS 362, MS 362 C
English
36
If the spark plug comes with a
detachable adapter nut (1), screw the
adapter onto the thread and tighten it
down firmly to reduce the risk of arcing
and fire.
Installing the Spark Plug
N Screw home the spark plug, fit the
boot and press it down firmly.
N Fit the shroud.
Removing the shroud
N Move the Master Control lever to
stop position (0)
N Push the hand guard forward – the
chain is locked.
N Open the twist locks (1) by turning
them 1/4 turn counterclockwise with
the combination wrench.
N Remove the shroud (2).
Removing the fan housing
N Take out the screws (1).
N Push the hand guard upwards.
N Pull the underside of the fan
housing away from the crankcase
and remove it downwards.
Replacing a broken starter rope
N Use a screwdriver or suitable pliers
to remove the spring clip (2) from
the starter post.
N Carefully remove the rope rotor with
washer (3) and pawls (4).
The rewind spring may pop out and
uncoil during this operation – take care
to reduce risk of injury.
1
000BA045 KN
4903BA008 KN
Replacing the Starter Rope
and Rewind Spring
1
1
1
001BA199 KN
2
1
1
1
1
0001BA010 KN
4
4
3
2
001BA096 KN