Operating instructions

4.5 DISCHARGE CONVEYOR

Lifting and lowering of the discharge

conveyor is performed with the hand

winch handle (23-Figure: 12). When

the desired position is reached, secu-

re it with the chain, so that the weight

of discharge conveyor is distributed

between the wire rope and the

carrying chain.

(24 – Figure: 12).

When using and maintaining the

hand winch, follow the enclosed

manufacturer’s instructions.

The speed of the discharge conveyor

can be adjusted using the speed regu-

lator of the discharge conveyor

(K-Figure: 12).

4.4.3 “START-STOP” SWITCH (RCA 380 E)

Electrical system of the wood processor RCA 380 E includes, besides the main switch, also the “Start-Stop”

switch (S-Figure: 1). The “Start-Stop” switch is used to turn ON/OFF the electric driving motor, which

powers the cutting chain and whole hydraulic system. Using the red button of the “Start-Stop” switch you can

completely stop the operation of the machine.

Before staring the machine or pushing the “start-stop” switch it is recommended to lift the machine cover, to

allow easier starting of the electric motor (Refer to chapter 3.3).

4.4.4 MAIN SWITCH (RCA 380 E)

The wood processor’s main switch (R-Figure: 1b) shuts down the main power supply. Use the main switch

when stopping the work for longer periods or leaving the work place. Unauthorized access to the power switch

can be prevented by installing the padlock.

STOPSTOP