Operating instructions

22
5.10 CUTTING CHAIN BELT REPLACEMENT
• Disconnect the machine from the drive or unplug the power cord from the electrical outlet
• Remove the drive protection (41 – Figure: 22), remove the housing cover (42 – Figure: 22), remove the
drive cover (43 – Figure: 22)
• Remove the lubrication pump (44 – Figure: 22)
• Loosen the belt tensioner (45- Figure: 22)
• Remove the belt (46 – Figure:22) from the driven pulley (47 – Figure: 22)
• Remove the old belt and clean the area
• Install the new belt
• Position the belt onto the pulleys.
• Tension the belt and reinstall removed elements: lubrication pump (44 – Figure: 22), drive protection (41 –
Figure: 22), housing cover (42 – Figure:22), drive cover (43 – Figure: 22)
• After one hour test operation, recheck the tension of the belt (disconnect the machine from the drive). Per-
form additional tension controls every 50 hours of operation.
42
41
43
44
44
45
46
22
a
e
b
c
d
f