Technical data
Table Of Contents
- Introduction
- Getting Started
- Flip Closed
- Flip Open Guidelines
- Phone
- Contacts
- Messaging
- Calendar
- WAP Services
- Getting started with e-mail and WAP
- E-mail set up
- Automatically set up service provider and e-mail
- Manually set up service provider and e-mail
- Manually set up a service provider
- Manually set up e-mail
- Sending an e-mail for the first time
- Using e-mail with several configurations installed
- Setting up WAP Services
- WAP Profiles
- Automatically set up WAP
- Manually set up WAP
- Using WAP for the first time
- Using WAP with several configurations installed
- Locating settings in Windows 95 or 98
- Trusted Certificates
- Homepage
- Extras
- R380 Communications Suite
- Troubleshooting
- Important Information
- Index
Phone 79
5.
To delete a network from the list, select the network. A view with
the network name as its title appears in the display.
Tap and select
Delete
. The network is deleted and the Edit
preferred list view appears in the display with an updated network
list.
Call meter
Note: Call meter is only available in the Telephony - Settings
directory if your SIM supports Advice of Charge. Cost information
can only be displayed if it is supported by your network operator, if
no cost information is available the R380e displays a message.
Call meter allows you to select whether the cost or the time or the
cost and time of a call appears on the display.
To set the call meter:
1.
Tap
Call meter
in the Telephony - Settings directory. The Call meter
view appears on the display.
2.
To set the type of call meter, select
Display
and select
Cost
,
Time
or
Cost and time
. This setting allow you to specify the information
displayed during an active voice call. If
Cost and time
is selected
but there is insufficient room for both on the R380e display cost is
shown.
3.
Select
Credit Status
and then select
Limited
or
Unlimited
.
If the status is set to
Limited
you can set a credit limit, this is useful
because the potential cost of calls can be restricted. The call meter
shows decremental cost metering displaying the remaining credit.
If the status is set to
Unlimited
the call meter shows incremental
cost metering displaying the ongoing cost of the call.
4.
Select
Remaining credit
(only available if
Limited
is selected for
Credit status) and the enter your remaining credit limited.
Note: If no value is entered into Remaining credit or the value is set
to 0 an error message is displayed when you try to save the settings.
Please enter a value for remaining credit.
5.
Select
Price per unit
and enter your networks unit cost.
Note: Contact your network provider for the Price per unit if you are
unsure.
6.
Select
Currency
and type a 3 letter currency code which represents
your country, e.g.
GBP
represents Great Britain Pound.