Operating instructions

- 25 -
If the cutting quality decreases:
•
Check the cutting depth (see page 33).
•
Check the cutting stick (see page 29).
•
Replace or grind the blade (see page
25 - 33).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only be
performed by trained staff.
•
Blade and cutting stick replacement
•