Operating instructions

- 27 -
480EP
B
A
C
480EP
The 3 eccentrics are now exposed and should
be turned counter clockwise to position "0"
with the special wrench and attachable
extension pipe (A) (in the tool set). The slot
must correspond to position "0" (B).
Unscrew the blade screws (C) on the right
hand side.
Remove the special wrench and turn on the
main switch until the blade returns to the home
position.
Warning
Do not turn main switch to position
"0" whilst blade is moving upwards! The clamp
must always overlap the blade!
Danger! Risk of injury!
Clamping
Blade
OK
OK
•
Blade and cutting stick replacement
•