MODEL LC-60LE631X LCD COLOUR TELEVISION OPERATION MANUAL cover_LC_60LE631X_B5.
cover_LC_60LE631X_B5.
Contents Page Page Supplied accessories ................................................. 1 Dear SHARP customer............................................... 1 Important information ................................................ 1 Important Safety Precautions ................................... 2 Trademarks ................................................................. 2 Attaching the stand unit............................................. 3 Setting the TV ...........................................
Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product. • Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product.
4 Attaching the stand unit • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. Attaching the stand cover. 1 2 Insert the stand cover. Insert and tighten four short screws into the holes of the stand cover. CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. 1 Confirm that there are screws with the stand unit.
Setting the TV 1 Connecting the antenna cable To enjoy a clearer picture, use an outdoor antenna. Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable) Antenna cable (commercially available) To antenna terminal Room antenna terminal (75-ohm type) 2 Connecting the AC cord Plug the AC cord in to the AC outlet (product shape varies in some countries). NOTE • Place the TV close to the AC outlet, and keep the power plug within reach.
Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV. CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment.
Remote control unit SLEEP Set the Sleep timer. 0hr.30min. 1 2 3 4 5 6 12 Off 13 14 15 16 17 18 7 8 9 10 11 19 20 E R 1 POWER (STANDBY/ON) To switch the power on and off. (See pages 7 and 9) 2 0–9 Set the channel. TELETEXT mode: Set the page. (See page 24) 3 A (Flashback) Press A to return to the previous selected channel or external input mode. 4 ATV Press to access ATV mode. (See page 20) 5 DTV Press to access DTV mode.
Part names TV (Front) POWER MENU INPUT CH VOL + /− POWER Remote control sensor OPC sensor POWER indicator SLEEP OPC SLEEP timer indicator OPC indicator POWER indicator Light off Power off. Lighted (Red) The TV is in standby mode. Lighted (Green) The TV is on. 7 LC_60LE631X_EN.
Part names (Continued) TV (Rear) 9 10 11 12 1 13 2 1 HDMI 1 terminal* 2 HDMI 2 terminal 3 HDMI 3 terminal 4 RS-232C terminal 5 INPUT 4/INPUT 5 terminals 6 DIGITAL AUDIO OUTPUT terminal 7 INPUT 6 terminals 8 AUDIO OUT terminals 9 AUDIO IN (R/L) terminal 10 PC terminals* 11 Antenna input terminal 12 USB terminal 13 Headphone jack ( 3.5 mm) • The speakers do not output volume when headphones are plugged in. 8 3 4 5 6 7 * The HDMI1 and PC terminals can both use the same audio input terminal.
Selected item Turning the TV on/off Turning on/off the power Select “Yes” when your antenna is set-up and connected independently. No Select “No” when you do not need to supply voltage to your antenna, i.e. when your antenna is connected to a community antenna (The factory default setting of this function is “No”). • To turn on the power Press POWER on the TV (After a few seconds, an image appears with sound). • To turn off the power Switch it off by pressing POWER on the TV.
Checking Signal information (Continued) Digital settings Checking Signal information Press a/b to select “Signal information”. Auto search Manual search Manual adjust Signal information Programme setup Channel number 68 Signal strength Antenna power Current 100 Signal quality Maximum 100 Current 98 Maximum 98 You can reconfigure DTV services settings automatically or manually. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Setup”.
Programme setup (Continued) Search The next channel will be search in order. The item position of services can be sorted Fine 1 Press a/b to select the service whose item position you want to move, and then press B. You can adjust the frequency to your desired position. NOTE DTV 005 Maori Television DTV 022 Parliament TV DTV 100 Freeview I HD 2 Press a/b to move it to the desired position, and then press ENTER.
Programme setup (Continued) Sort (Analogue) Channel position can be sorted freely. 1 2 3 4 5 Repeat steps 1 to 4 in Auto search. Press a/b to select “Sort”, and then press ENTER. Press c/d to select “Yes”, and then press ENTER. Press a/b/c/d to select the channel you want to move, and then press ENTER. Move it to the desired position by pressing a/b/c/d, and then press ENTER. Repeat the steps 4 and 5 until all desired channels are sorted.
Active contrast Picture menu Picture ECO Audio [STANDARD] AV mode [ Off ] OPC Backlight [ +16 ] –16 +16 Contrast [ +30 ] 0 +40 Brightness [ 0 ] –30 +30 Colour [ + 4 ] –30 +30 Tint [ 0 ] –30 +30 Sharpness [ + 2 ] –10 +10 Advanced Automatically adjusts the contrast of an image according to the scene. (On, Off) 3D-Y/C Provides high quality images with minimal dot crawl and cross colour noise. (On, Off) NOTE • 3D-Y/C is not selectable depending on the input signal type.
ECO menu Setup menu MENU [ECO] MENU [Setup] Setup ECO Option Setup [ Enable] No signal off 4 Power management No operation off Digital setup Option Auto installation 4 Analogue programme setup [ 3hr.] Digital programme setup Ecology Child lock Input skip 4 Input label Position 4 HDMI auto view [ On] WSS No signal off • Five minutes before the power shuts down, the remaining time displays every minute.
Input label Setup menu (Continued) You can assign each input source a label as you prefer. Parental rating This function allows TV channels to be restricted. It prevents children from watching violent or sexual scenes that may be considered inappropriate. 1 2 3 Repeat steps 1 to 3 in Setting a password. Press a/b to select “Parental rating”, and then press ENTER. Press a/b to select your desired rating, and then press ENTER. 1 2 3 4 5 Press INPUT to select the desired input source.
Setup menu (Continued) Option menu 4:3 mode Option PC audio select The WSS signal has 4:3 auto-switching that allows you to select between Panorama and Normal. Selected item Output volume select Auto volume Clear voice Description Digital audio output Wide image without side bars Panorama Digital setup [HDMI1] [Fixed] [On] [On] [PCM] Audio only 4 Game play time Normal range keeping 4:3 or 16:9 aspect ratio Normal 4 Colour system 4 Fine sync. DivX(R) Reg.
Option menu (Continued) Adjusting the PC image automatically Digital audio output This function allows you to select your favourite audio output system. Selected item Dolby Digital PCM Description Dolby Digital audio will be output when there is a Dolby Digital audio signal. The output will be in PCM when there is no Dolby Digital audio signal. The optical output format is normally in PCM. Audio only When listening to music from a music programme, you can set the display off and enjoy audio only.
Switching subtitle languages (DVB Subtitle) Digital setup menu Option Digital setup Each time you press [ on the remote control, the subtitle switches when the broadcast contains subtitle information.
Programme Guide Info You can check the current schedule of DTV events and view detailed information about current events. 1 2 Press GUIDE to display the programme guide list. Press a/b to display your desired programme, and then press ENTER. While watching DTV you can check the extended programme information on the screen using INFO on the remote control. 1 2 3 • When you press ENTER, the TV jumps to the channel. Channel list 020 [Mon.
ATV (Analogue)/DTV/RADIO buttons Use the following buttons on the remote control to operate the menu. DTV When the TV accesses to DTV mode for the first time, you need to run the auto search. To scan all available services in your area, follow the procedures below. 1 To watch DTV broadcasts, select “DTV” from auto installation menu. (See page 10) 2 After setting the channels, you can select a channel using CH r/s or 0 – 9 on the remote control unit.
Switching the analogue audio format (Continued) In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press MPX, the mode switches between STEREO and MONO. Stereo mode BBC1 ATV PAL BBC1 01 ATV B/G STEREO PAL 01 B/G MONO When receiving a bilingual signal Each time you press MPX, the mode switches among CH A, CH B and CH AB.
EPG What is an EPG? An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG is broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a programme, do timer view the programme schedule in detail. Basic Operation Display the EPG screen 1 Press EPG. [Tue.] 19 [Wed.] 20 [Thurs.] 21 [Fri.] 22 [Sat.
Manual Selection EPG (Continued) Viewing the reminder schedule list 1 2 3 4 Press EPG. Press Y to display the reminder schedule list. Press a/b to display next or previous screen. Press MENU or EPG to exit. Cancelling the reminder timer setting 1 2 3 4 5 Press EPG. Press Y to display the reminder schedule list. Press a/b to select a programme you want to cancel. Press R to delete a programme from reminder list. Press MENU or EPG to exit.
Teletext function PC Control of the TV What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. News, weather reports, sports information, stock exchange prices and programme previews are among the many services available. Turning on and off Teletext 1 2 3 Select a TV channel or external input source providing the Teletext programme. Press m to display the Teletext. Each time you press m, the screen switches as shown below.
PC compatibility chart Horizontal Frequency Vertical Frequency VESA Standard Analogue (D-Sub) 720 g 400 31.5 kHz 70 Hz 640 g 480 31.5 kHz 60 Hz SVGA 800 g 600 XGA 1,024 g 768 37.9 kHz 60 Hz 48.4 kHz 60 Hz WXGA 1,360 g 768 47.7 kHz 60 Hz SXGA 1,280 g 1,024 64.0 kHz 60 Hz SXGA+ 1,400 g 1,050 65.3 kHz 60 Hz Resolution VGA Digital (HDMI) DDC is a registered trademark of Video Electronics Standards Association.
USB Media Player Connecting a USB device Connect a USB device to the TV as shown below. USB media Press INPUT to select the “USB” mode or the TV automatically switches to the USB mode when a USB device is connected to the TV. USB media In this mode, you can enjoy viewing photos, listening to music and watching videos from external USB devices. NOTE • You cannot enter the USB mode when there is no USB device. • “Wide mode” is fixed during “Photo mode”, “Music mode” and “Movie mode”.
USB Media Player (Continued) Viewing video Movie mode 1 2 3 Press c/d to select “Movie mode”, and then press ENTER. Press a/b to select the desired folder or directory, and then press ENTER. Press a/b to select the desired video. USB Select movie 1/1 File name Folder 1 Folder 2 Folder 3 Movie 1 Movie1.avi XXX MBytes XXX x XXX Buttons for full screen display operation Buttons ENTER Play/Pause the video. a (Cursor) Go to the previous file. b (Cursor) Go to the next file.
USB Media Player (Continued) Photo mode Viewing thumbnails Music mode Select photo Select music 1/1 Page 1 / 1 Page Time File name USB g220\Audio\mp3 \USB g220\Audio\mp3 SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_08.MP3 SONG_09.MP3 SONG_10.MP3 3:05 3:15 3:02 6:05 4:52 9:25 3:13 3:23 3:33 3:43 Playing: 1 2 3 Press c/d to select “Music mode”, and then press ENTER. Press a/b to select the desired folder, and then press ENTER.
USB Media Player (Continued) DivX® setup This is the function to confirm your registration code. 1 Press MENU and the MENU screen displays. 2 Press c/d to select “Option”. 3 Press a/b to select “DivX(R) Reg. Code”, and then press ENTER. • Copy the 10 digit code down. DivX® VOD Code You need to visit the DivX main page to register your TV. Please follow the online instruction to create DivX account and DivX registration video download.
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible solution • No power. • Check if you pressed POWER on the remote control unit. (See pages 7 and 9) If the indicator on the TV lights up red, press POWER. • Is the AC cord disconnected? • Has the power been turned on? (See pages 7 and 9) • Unit cannot be operated. • External influences such as lightning, static electricity, etc.
Specifications Item Model LC-60LE631X LCD panel 60o (1525 mm) UV2A & BLACK TFT LCD Resolution 2,073,600 pixels (1920 g 1080) Video colour system TV function PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV-standard Receiving channel Analogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 Digital DVB-T VHF/UHF 44.25—863.
Protection against overturning Removing the stand There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety. For wall mounting with the optional bracket (AN-52AG4) remove the stand. Anchoring the TV to the wall or a pillar • Remove the connected cables (DVD, VCR, etc) from the terminals. • Detach the four caps at the 4 locations on the rear of the TV.
Mounting the TV on a wall To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. 1 2 1 • This TV should be mounted on a wall only with the wall mount bracket available from SHARP (See page 31). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Dimensional drawings Unit: mm 1384 1333*1 1333 *1 341.5 400 386 438 178 10° 106 219 AN-52AG4 I Active area NOTE • Dimensions do not include protrusions such as screws and some parts. 34 LC_60LE631X_EN.
CLEARING THE PASSWORD If you forget the password, clear the password using the following procedure. 1 2 3 4 Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “Child lock”, and then press ENTER and the password input screen display. If you enter “3001” using 0 – 9, the “Child lock” setting menu will be displayed. Enter the 4-digit number as a password using 0 – 9. The new password is now set. The Password is .
Memo 36 LC_60LE631X_EN.
cover2_LC_60LE630X_B5.
Printed in Malaysia TINS-F665WJZZ 12P12-MA-NF cover2_LC_60LE630X_B5.
