Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 123 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
HOSE BED DIVIDER(S)
Five (5) adjustable aluminum hose bed partition(s) shall be provided in the hose storage area. The partition(s) shall be
constructed from 3/16” smooth plate aluminum with split aluminum tubing welded to the top and rear edges. Hand holes
shall be provided along the outer edge to assist with movement in the hose bed area.
ALUMINUM HOSE BED COVER
A two-section hose bed cover shall be provided. Each door shall be fabricated from 1/8" NFPA aluminum treadplate with
formed hat sections for bracing. Doors shall be hinged along each side of the hose body using stainless steel piano hinge.
The top surface of each section shall slant down with the highest point in the center of the hose bed area and shall be
supported from underneath by at least one (1) adjustable hose bed divider.
Each section shall be constructed to support the weight of a person (300 lbs).
Each section shall utilize pneumatic cylinders to assist with opening and closing. There shall be a chrome grab handle on
each section at the rear of the hose body.
Each compartment shall have a horizontally mounted LED light stick on the underside of the door that will be
automatically activated when the door is opened and wired to the compartment door ajar warning light provided in cab.