Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 124 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
EQUIPMENT PAYLOAD WEIGHT ALLOWANCE
In compliance with NFPA 1901 standards, the pumper shall be designed for an equipment loading allowance of 2,500 lbs.
of Loveland Fire & Rescue provided loose equipment based on the pumper body having more than 250 cu. ft. of storage
space.
Loveland Fire & Rescue has specified equipment weight of 4,500 pounds not inc. hose and ladders.
EQUIPMENT
The following equipment shall be furnished with the completed pumper vehicle;
 One (1) container of assorted stainless steel nuts, bolts, screws and washers used in the construction of the
apparatus shall be provided with the completed apparatus.
 There shall be two (2) NFPA approved folding aluminum wheel chocks provided for 44" diameter tires that
together will hold the vehicle when loaded to its GVWR or GCWR, on a hard surface with a 20 % grade, with the
transmission in neutral, and the parking brake released.
− The wheel chock(s) shall be mounted behind rear wheels, below body on streetside.
 One (1) Duo-Safety 900-A series 24' 2-section extension ladder(s) shall be provided with the completed unit.
− The ladder(s) shall be mounted on the specified ladder rack.
 One (1) Duo-Safety 775A series 14' aluminum roof ladder(s) shall be provided with the completed unit.
− The ladder(s) shall be mounted on the specified ladder rack.
 One (1) Duo-Safety 585-A 10' aluminum folding ladder(s) shall be provided with the completed unit.
− The ladder(s) shall be mounted on the specified ladder rack.
 One (1) Nupla 8' Trash/Arson hook with fiberglass handle shall be provided with the completed unit.
− The above specified pike pole will have a D handle attached
− The pike pole(s) shall be mounted on the specified ladder rack.
 One (1) Akron UT-10 10' fiberglass pike pole(s) shall be provided with the completed unit.
− The above specified pike pole will not have a D handle attached
− The pike pole(s) shall be mounted on the specified ladder rack.
 Four (4) Bright Star Lighthawk flashlight(s) shall be provided. Each flashlight shall be orange in color. Each
flashlight shall have a 12 volt DC charger and vehicle mount kit. Each flashlight shall have a 12 watt xenon style
bulb and reflector. The flashlights shall be wired to battery direct unless otherwise specified by the customer.
− The flashlight(s) shall be mounted on the completed unit, locations as per the Loveland Fire & Rescue.