Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 25 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
CAB PAINT PRIMARY/LOWER COLOR
The primary/lower paint color shall be PPG FBCH 910784 red
CAB PAINT WARRANTY
The cab and chassis shall be covered by a limited manufacturer paint warranty which shall be in effect for ten (10) years
from the first owner’s date of purchase or in service or the first 100,000 actual miles, whichever occurs first.
CAB PAINT INTERIOR
The visible cab structure surfaces shall be painted with a Zolatone #20-72 silver gray texture finish.
CAB ENGINE TUNNEL
The cab interior shall include an integrated engine tunnel constructed of 5052-H32 Marine Grade, .190 of an inch thick,
aluminum alloy plate. The tunnel shall be a maximum of 41.50 inches wide X 23.00 inches high.
CAB ENTRY DOORS
The cab shall include four (4) entry doors, two (2) front doors and two (2) crew doors as high as possible for ease of
entering and egress when outfitted with an SCBA. The doors shall be full height and constructed of extruded aluminum
with a nominal thickness of .125 inch. The exterior skins shall be constructed of .125 inch aluminum plate.
All cab and crew doors shall be of substantial weight for the optimum strength and rigidity for the best performance in all
cab crash testing. Any cab with front and crew doors manufactured of less than the material thickness of .125 inch in both
the extrusion and exterior skin shall not be considered.
The doors shall include a double rolled style automotive rubber seal around the perimeter of each door frame and door
edge which ensures a weather tight fit.
All door hinges shall be hidden within flush mounted cab doors for a pleasing smooth appearance and perfect fit along
each side of the cab. Each door hinge shall be piano style with a 0.38 inch pin and shall be constructed of stainless steel.
The piano style hinge and hidden flush mounted door is the most favorable construction keeping dirt and debris out of the
hinge allowing for optimum operation throughout the lifetime of the door.
Proposals offering door hinge thickness any less than stated shall not be considered.
Proposals including doors that do not comply with the flush mounting as described or those including exposed hinges
shall not be considered.
CAB ENTRY DOOR TYPE
All cab entry doors shall be full length in design to fully enclose the lower cab steps.
CAB STRUCTURAL WARRANTY
The cab structure shall be warranted for a period of ten (10) years or one hundred thousand (100,000) miles which ever
may occur first. Warranty conditions may apply and shall be listed in the detailed warranty document that shall be
provided upon request.