Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 27 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
DATA RECORDING SYSTEM
The chassis shall have a Weldon Vehicle Data Recorder system installed. The system shall be designed to meet NFPA
1901 and shall be integrated with the Weldon Multiplex electrical system. The following information shall be recorded:
• Vehicle Speed
• Acceleration
• Deceleration
• Engine Speed
• Engine Throttle Position
• ABS Event
• Seat Occupied Status
• Seat Belt Status
• Master Optical Warning Device Switch Position
• Time
• Date
Each portion of the data shall be recorded at the specified intervals and stored for the specified length of time to meet
NFPA 1901 guidelines and shall be retrievable by connecting a laptop computer to the VDR system.
POWER & GROUND STUD
A 40 amp battery direct power and ground stud shall be provided and installed in the electrical distribution panel. The
stud shall be size #10 and protected with a 40 amp circuit breaker.
AUXILIARY POWER & GROUND STUD
An auxiliary set of power and ground studs shall be provided and installed behind the electrical center cover with a 40
amp breaker. The studs shall be .375 inch diameter and capable of carrying up to a 40 amp load switched with the
master power switch.
EXTERIOR ELECTRICAL TERMINAL COATING
All terminals exposed to the elements will be sprayed with a yellow protective rubberized coating to prevent corrosion.