Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 39 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
TIRE PRESSURE INDICATOR
There shall be a voucher provided with the chassis for a pop up style tire pressure indicator at each tire valve stem.
The indicator shall provide visual indication of pressure in the specific tire.
The tire pressure indicators shall be redeemed upon the vehicle manufacturer’s receipt of the voucher for installation by
the customer.
FRONT WHEEL
The front wheels shall be Alcoa hub piloted, 22.50 inch X 12.25 inch polished aluminum wheels. The hub piloted
mounting system shall provide easy installation and shall include two-piece flange nuts. The wheels shall feature one-
piece forged strength and a polished finish that lasts.
REAR WHEEL
The outer rear wheels shall be Alcoa hub piloted, 22.50 inch X 8.25 inch LvL One™ aluminum wheels with a polished
outer surface. The inner rear wheels shall be Alcoa hub piloted, 22.50 inch X 8.25 inch aluminum wheels with LvL One™
bright machine finish. The hub piloted mounting system shall provide easy installation and shall include two-piece flange
nuts.
WHEEL TRIM
The front wheels shall include stainless steel lug nut covers and stainless steel baby moons shipped loose with the
chassis for installation by the apparatus builder. The baby moons shall have cutouts for oil seal viewing when applicable.
The rear wheels shall include stainless steel lug nut covers and band mounted spring clip stainless steel high hats
shipped loose with the chassis for installation by the apparatus builder.
The lug nut covers, baby moons, and high hats shall be RealWheels
®
brand constructed of 304L grade, non-corrosive
stainless steel with a mirror finish. Each wheel trim component shall meet D.O.T. certification.
TIRE CHAINS
Onspot brand six (6) strand automatic ice chains shall be installed on the rear axle of the chassis to provide instant
traction while traveling on ice and snow at speeds below 35 mph.
TIRE CHAINS ACTIVATION
The tire chain system shall be controlled through a virtual switch on the multiplex display. The virtual switch shall display
“Active” when the tire chains are engaged. The tire chains shall be interlocked with the transmission and shall engage
when the vehicle is traveling 30 MPH or less. After traveling over 30 MPH, the vehicle must be reduced to a speed below
5 MPH for the tire chains to be engaged or re-engaged.