Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 44 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
FRONT BUMPER APRON
The 18.00 inch extended front bumper shall include an apron constructed of 0.19 inch thick embossed aluminum tread
plate.
The apron shall be installed between the bumper and the front face of the cab affixed using stainless steel bolts attaching
the apron to the top bumper flange.
MECHANICAL SIREN
The front bumper shall include an electro mechanical Federal Q2B™ siren, which shall be streamlined, chrome-plated
and shall produce 123.00 decibels of sound at 10.00 feet. The Q2B™ siren produces a distinctive warning sound that is
recognizable at long distances. A unique clutch design provides a longer coast down sound while reducing the amp draw
requirements to 100 amps. The siren shall measure 10.50 inches wide X 10.00 inches high X 14.00 inches deep.
MECHANICAL SIREN LOCATION
The siren shall be recess mounted on the left side of the front fascia of the bumper centered between the radius and
frame rail.
AIR HORN
The front bumper shall include two (2) Hadley brand E-Tone air horns which shall measure 24.00 inches long with a 6.00
inch round flare. The air horn shall be a trumpet style and shall include a chrome finish on the inside and a black painted
finish on the outside of the trumpet.
AIR HORN LOCATION
The air horns shall be recess mounted in the front bumper face on the officer side of the bumper in the inboard and
outboard positions relative to the right hand frame rail.
AIR HORN RESERVOIR
One (1) air tank, with a 1200 cubic inch reservoir, shall be installed on the chassis to act as a supply tank for operating air
horns. The reservoir shall be isolated with a 90 PSI pressure protection valve on the reservoir supply side to prevent
depletion of the air to the air brake system.
ELECTRONIC SIREN SPEAKER
The bumper shall include one (1) Cast Products Inc. model SA4301, 100 watt speaker which shall be recess mounted
within the bumper fascia. The speaker shall include a flat mounting flange and be chrome in color.
ELECTRONIC SIREN SPEAKER LOCATION
The electronic siren speaker shall be located on the front bumper face in the center position between the frame rails.
FRONT BUMPER TOW EYES
The bumper shall include two (2) chrome plated tow eyes shall be installed through the front bumper. The eyes shall be
fabricated from 0.75 inch thick #1020 ASTM-A36 hot rolled steel. The inside diameter of the eye shall be 2.00 inches and
include a chamfered edge.