Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 49 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
HEADER TRIM
The cab interior shall include the header above the driver and officer positions which shall be constructed of vacuum
formed ABS panel.
INTERIOR TRIM SUNVISOR
The header shall include two (2) sun visors, one each side forward of the driver and officer seating positions above the
windshield. Each sun visor shall be constructed of Masonite and covered with padded vinyl trim.
TRIM CENTER DASH
The main center dash area shall be constructed of 5052-H32 Marine Grade, 0.13 inch thick aluminum plate.
TRIM CENTER DASH INTERIOR PAINT
The entire center dash shall be coated with a Zolatone #20-72 silver gray texture finish. Any pods attached to the dash
shall also be painted this color.
TRIM LH DASH
The left hand dash shall be a one (1) piece durable vacuum formed ABS composite housing which shall be custom
molded for a perfect fit around the instrument panel and the lower control panels to the left and right of the steering
column.
TRIM RH DASH
The right hand dash shall be constructed of 5052-H32 Marine Grade, 0.13 of an inch thick, one hundred percent primary
aluminum plate and shall include a glove compartment with a hinged door and a Mobile Data Terminal (MDT)
provision. The glove compartment size will measure 14.00 inches wide X 6.38 inches high X 5.88 inches deep. The MDT
provision shall be provided above the glove compartment.
TRIM RH DASH INTERIOR PAINT
The right hand dash shall be painted with a Zolatone #20-72 silver gray texture finish.
ENGINE TUNNEL TRIM
The cab engine tunnel shall be covered with .44 of an inch thick multi-layer mat consisting of .25 inch closed cell foam, .13
of an inch thick PVC acoustical barrier and .06 inch thick non-slip pebble grain. The engine tunnel mat shall be trimmed
with anodized aluminum stair nosing trim for an aesthetically pleasing appearance.
POWER POINT DASH MOUNT
The cab shall include two (2) 12 volt lighter type receptacles in the dash dedicated as a power source for additional
portable or mobile items. The receptacles shall be wired battery direct.
AUXILIARY POWER POINT REAR CREW
The cab interior shall include two (2) 12 volt cigarette lighter type receptacle located on the forward facing seat box in the
crew area. The receptacle shall be connected to the batteries. This receptacle shall be provided to act as a power source
for additional portable or mobile items.