Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 52 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
SEAT COLOR
All seats supplied with the chassis shall be gray in color. All seats shall include red seat belts.
SEAT BACK LOGO
The seat backs shall include the logo for SVI. The logo shall be centered on the standard headrest of the seat back and
on the left side of a split headrest.
SEAT DRIVER
The driver's seat shall be an H.O. Bostrom Firefighter Sierra model seat. The seat shall feature eight-way electric
positioning. The eight positions shall include up and down, fore and aft with 8.00 inches of travel, back angle adjustment
and seat rake adjustment. The seat shall feature integral springs to isolate shock.
The seat shall feature an all belts to seat (ABTS) style of safety restraint. The ABTS feature shall include a three-point
shoulder harness with the lap belt, automatic retractor and buckle as an integral part of the seat assembly.
The minimum vertical dimension from the seat H-point to the ceiling for this belted seating position shall be 35.00 inches
measured with the seat height adjusted to the lowest position of travel.
This model of seat shall have successfully completed the static load tests set forth by FMVSS 207, 209, and 210 in effect
at the time of manufacture. This testing shall include a simultaneous forward load of 3000 pounds each on the lap and
shoulder belts and twenty (20) times the weight through the center of gravity.
The materials used in construction of the seat shall also have successfully completed testing with regard to the
flammability of materials used in the occupant compartments of motor vehicles as outlined in FMVSS 302, of which
dictates the allowable burning rate of materials in the occupant compartments of motor vehicles.
SEAT BACK DRIVER
The driver’s seat shall include a standard seat back incorporating the all belts to seat feature (ABTS). The seat back shall
feature a contoured head rest.