Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 55 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
SEAT CREW FORWARD FACING CENTER
The crew area shall include a seat in the forward facing center position which shall be a H.O. Bostrom Firefighter series.
The seat shall feature a tapered and padded seat, and cushion. The seat and cushion shall be hinged and compact in
design for additional room and shall remain in the stored position until occupied.
The seat shall feature an all belts to seat (ABTS) style of safety restraint. The ABTS feature shall include a three-point
shoulder harness with the lap belt and automatic retractor as an integral part of the seat assembly. The buckle portion of
the seat belt shall extend from the seat base towards the driver position within easy reach of the occupant.
The minimum vertical dimension from the seat H-point to the ceiling for each belted seating position shall be 35.00 inches.
This model of seat shall have successfully completed the static load tests by FMVSS 207/210. This testing shall include a
simultaneous forward load of 3000 pounds each on the lap and shoulder belts and twenty (20) times the weight through
the center of gravity. This model of seat installed in the cab model, as specified, shall have successfully completed the
dynamic sled testing using FMVSS 208 as a guide with the following accommodations. In order to reflect the larger size
outfitted firefighters, the test dummy used shall be a 95th percentile hybrid III male weighing 225 pounds rather than the
50th percentile male dummy weighing 165 pounds as referenced in FMVSS 208. The model of seats shall also have
successfully completed the flammability of materials used in the occupant compartments of motor vehicles as outlined in
FMVSS 302, of which decides the burning rate of materials in the occupant compartments of motor vehicles.
SEAT BACK FORWARD FACING CENTER
The forward facing center seat shall feature a SecureAll™ SCBA locking system which shall be one bracket model and
store all U.S. and International SCBA brands and sizes while in transit or for storage within the seat back. The bracket
shall be easily adjustable with all adjustment points using similar hardware and adjustments with one tool.
The bracket system shall be free of straps and clamps that may interfere with auxiliary equipment on SCBA units. The
center guide fork shall keep the SCBA tank in place for a safe and comfortable fit in the seat back cavity. The SCBA unit
simply needs to be pushed against the pivot arm to engage the patented auto- locking system. Once the lock is engaged,
the top clamp shall surround the top of the SCBA tank for a secure fit in all directions.
The SecureAll™ shall include a release handle which shall be integrated into the seat cushion for quick and easy release.
This shall eliminate the need for straps or pull cords to interfere with other SCBA equipment.
SEAT MOUNTING FORWARD FACING CENTER
The forward facing center seats shall be installed facing the front of the cab.
SEAT FRAME FORWARD FACING
The forward facing center seating positions shall include an enclosed seat frame which is located and installed on the rear
wall. The seat frame shall measure 42.38 inches wide X 12.38 inches high X 22.00 inches deep. The seat frame shall be
constructed of 5052-H32 Marine Grade, .190 inch thick, 100 percent primary smooth aluminum plate. The seat box shall
be painted with the same color as the remaining interior.
SEAT FRAME FORWARD FACING STORAGE ACCESS
There shall be two (2) access points to the seat frame storage area, one (1) on each side of the seat frame. Each access
point shall be covered by a hinged door which measures 15.00 inches in width X 10.63 inches in height.