Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 57 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
REARVIEW MIRRORS
Retrac Aerodynamic West Coast style single vision mirror heads model 613285 shall be provided and installed on each of
the front cab doors.
The mirrors shall be mounted via 1.00 inch diameter tubular stainless steel arms to provide a rigid mounting to reduce
mirror vibration.
The mirrors shall measure 8.00 inches wide X 19.00 inches high and shall include an 8.00 inch convex mirrors with a
stainless steel back, model 980-4, installed below the flat glass to provide a wider field of vision. The flat mirrors shall be
motorized with remote horizontal and vertical adjustment. The control switches shall be mounted within easy reach of the
driver. The convex mirrors shall be manually adjustable. The flat mirror glass shall be heated for defrosting in severe cold
weather conditions.
The mirror backs shall be constructed of vacuum formed chrome plated ABS plastic housings that are corrosion resistant
and shall include an amber marker light. The mirrors shall be manufactured with the finest quality non-glare glass.
REARVIEW MIRROR HEAT SWITCH
The heat for the rearview mirrors shall be controlled through a virtual button on the multiplex display.
CAB FENDER
Full width wheel well liners shall be installed on the extruded cab to limit road splash and enable easier cleaning. Each
two-piece liner shall consist of an inner liner 16.00 inches wide made of vacuum formed ABS composite and an outer
fenderette 3.50 inches wide made of 14 gauge 304 polished stainless steel.
MUD FLAPS FRONT
The front wheel wells shall have mud flaps installed on them.
CAB EXTERIOR FRONT & SIDE EMBLEMS
The cab shall include one (1) Spartan emblem installed on the exterior of the cab above each front wheel well.
CAB EXTERIOR MODEL NAMEPLATE
The cab shall include custom “Metro Star” nameplates on the front driver and officer side doors.
IGNITION
A master battery system with a keyless start ignition system shall be provided. Each system shall be controlled by a ¼
turn Cole Hersee switch, both of which shall be mounted to the left of the steering wheel on the dash. A chrome push
type starter button shall be provided adjacent to the master battery and ignition switches.
Each switch shall illuminate a green LED indicator light on the dash when the respective switch is placed in the “ON”
position.
The starter button shall only operate when both the master battery and ignition switches are in the “ON” position.