Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 73 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
REAR TOW EYES
There shall be two (2) heavy duty rear mounted tow eyes securely attached to the chassis frame and mounted below the
apparatus body. The tow eyes shall be fabricated from 3/4" thick steel plate and shall have a black powder coat paint
finish.
GROUND LIGHTS
Two (2) OnScene Solutions 9" LED Nightstik ground lights shall be mounted below the bumper.
WHEEL WELL EXTERIOR PANEL
The exterior panel of the body wheel well enclosure shall be constructed from 3/16" smooth aluminum panels.
STAINLESS STEEL BODY FENDERS
The body wheel well openings shall be provided with round radius, polished stainless steel fenderettes. The fenderettes
shall be bolted and easily replaceable if damaged. The fenderettes shall be installed using a rubber gasket to reduce
buildup of moisture and/or debris.
WHEEL WELL LINERS
The wheel wells shall be provided with an easily removable polymer, circular inner fender liner. The inner liner shall be
bolted to the wheel well with stainless steel bolts and spaced away from the wheel well so the liner will not accumulate dirt
or water.
SCBA CYLINDER COMPARTMENTS
There shall be two (2) SCBA cylinder storage compartments located, one (1) on the curbside, and one (1) on the
streetside of rear wheel well area. Each compartment shall be capable of storing two (2) SCBA cylinders (60 min
cylinders). Each compartment shall have a vertically hinged door with a positive catch latch installed and painted primary
lower body color. Each compartment shall allow the storage of an SCBA cylinder up to 7-3/4" in diameter. The door shall
activate the "Hazard Warning Light" in the cab when not in the closed position.