Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 77 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
REFLECTIVE STRIPE - BODY SIDES
A 4" minimum reflective stripe shall be affixed to the sides of the body.
 The stripe material shall be 3M Scotchcal 680.
 This reflective stripe shall be white in color.
There shall be a 1" Scotchcal reflective stripe located approx. 1" above the main stripe.
 This reflective stripe shall be blue in color.
The stripe shall remain in a straight line from the front of the vehicle to the rear.
CHEVRON REFLECTIVE STRIPE - REAR SIDES PANELS
At least 50 percent of the rear-facing vertical surfaces, visible from the rear of the apparatus, excluding any pump panel
areas not covered by a door, shall be equipped with retroreflective striping in a chevron pattern sloping downward and
away from the centerline of the vehicle at an angle of 45 degrees. Each stripe shall be 6" width.
The rear side panels only of the body shall have a Chevron style reflective stripe layout, and cover as much of the rear
side panels as possible. Chevron panels shall have a 3M UV over laminate to protect from UV rays, scene damage, and
everyday use. Chevron panels shall have a minimum 10 year warranty for material failure, and colorfastness.
 The stripe material shall be 3M Diamond Grade.
All retroreflective materials required shall conform to the requirements of ASTM D 4956, Standard Specification for
Retroreflective Sheeting for Traffic Control, Section 6.1.1 for Type I Sheeting.
 This reflective chevron stripe shall alternate red and fluorescent yellow-green in color.