Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 82 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
STREETSIDE COMPARTMENT - ABOVE REAR WHEELS (S2)
The interior useable compartment width shall be approximately 59.0" wide.
The compartment door opening shall be approximately 52.0" wide.
This compartment shall have a ROM roll-up door.
 The roll-up door slats and the door trim components shall be painted to match the single tone exterior
color.
 The ROM door shall be equipped with a magnetic type door ajar switch integrated in lift bar handle and the lower
retainer block to signal open door.
 There shall be NO keyed lock on this roll-up compartment door.
 One (1) aluminum drip pan/door finish guard shall be provided with the rollup door.
A compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The
threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.
COMPARTMENT COMPONENTS
 There shall be vertically mounted aluminum shelf trac for shelving installation.
 There shall be two (2) adjustable shelf/shelves approximately 12" deep.
- Reflective Scotchcal stripe shall be provided on the front face of the shelf. The stripe shall be blue in color.
 A 0.190 inch smooth plate aluminum tool mounting board shall be provided on upper rear wall of the
compartment. The tool mounting board shall be spaced ½” off the rear compartment wall to allow for mounting
hardware to be used on the rear of the board.
 Two (2) vertically mounted OnScene Solutions LED Nightstiks.