Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 83 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
STREETSIDE COMPARTMENT - REAR (S3)
The interior useable compartment width shall be approximately 49.0" wide.
The compartment door opening shall be approximately 42.0" wide.
This compartment shall have a ROM roll-up door.
 The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
 The ROM door shall be equipped with a magnetic type door ajar switch integrated in lift bar handle and the lower
retainer block to signal open door.
 There shall be NO keyed lock on this roll-up compartment door.
A compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The
threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.
COMPARTMENT COMPONENTS
 There shall be vertically mounted aluminum shelf trac for shelving installation.
 There shall be two (2) adjustable shelf/shelves approximately 12" deep.
- Reflective Scotchcal stripe shall be provided on the front face of the shelf. The stripe shall be blue in color.
 A 0.190 inch smooth plate aluminum tool mounting board shall be provided on upper rear wall of the
compartment. The tool mounting board shall be spaced ½” off the rear compartment wall to allow for mounting
hardware to be used on the rear of the board.
 Two (2) vertically mounted OnScene Solutions LED Nightstiks.