Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 89 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
HOSEBED ACCESS HANDRAIL
There shall be two (2) handrail(s) mounted on rear of body to assist in access to hosebed storage area. Handrails shall be
NFPA compliant 1-1/4" extruded aluminum tubing with chrome plated end stanchions.
FOLDING STEP(S)
There shall be nine (9) NFPA approved folding step(s) furnished and installed. Three (3) steps shall be located on the
front of the body on the streetside for use in accessing the upper dunnage area, and six (6) steps shall be located on the
rear of the apparatus, three (3) per side, for use in accessing the hose bed area. Each step shall be cast aluminum with
heavy duty stainless steel spring and textured step surface.
COMPARTMENT COMPONENTS DESCRIPTIONS
All interior compartment components shall be fabricated as follows:
ADJUSTABLE SHELVING HARDWARE
Adjustable shelving hardware shall be provided indicated in the numbered compartment list.
The shelving hardware shall include a minimum of four (4) aluminum shelf tracs mounted vertically on compartment side
walls or vertical partitions. There shall be one (1) cast aluminum shelf bracket per vertical shelf trac to mount each shelf,
tray, or adjustable storage module. Shelving hardware shall be of heavy duty quality with unlimited vertical adjustment
settings.
ADJUSTABLE SHELF/SHELVES
Adjustable shelf/shelves shall be provided in exterior compartment as indicated in the numbered compartment list.
Shelves shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate with a 2" vertical flange along the
front and rear edges. Shelves shall be designed to be used with flanges either in the upward position to hold various
equipment on shelf, or in the downward position for sweep-out shelf surface.
All shelves shall be fully adjustable, from top to bottom of the compartment. There shall be at least four (4) vertical
mounting channels and shelving hardware, two (2) each side of compartment. Shelving hardware shall be of heavy duty
quality with unlimited vertical adjustment settings.
SLIDE-OUT EQUIPMENT TRAY - (400 LB CAPACITY)
Slide-out equipment tray(s) shall be provided in exterior compartment, as indicated in the numbered compartment list.
Trays shall be fabricated from 3/16" (.188) aluminum 3003H-14 alloy smooth plate. Trays shall be built with a 3" vertical
lip, with welded corners, to form a box type tray surface. Sliding tracks shall be Accuride 502 series. The length shall be
per numbered compartment list and the extension shall be 100% of the slide length. Slides shall be constructed of formed
steel with ball bearings mounted in triple track rails. The tray shall be rated for a maximum 400 lbs. evenly distributed
load.
Tray(s) shall utilize a pneumatic cylinder mounted on underside to hold the tray in both the extended and closed positions.