Specifications

Loveland Fire/Rescue
Pumper
Production Specification
SVI #769 Page 95 of 125 June 17, 2010
..\4) Pricing & Change Orders\Production Change Order.pdf
CAB STEP LIGHTS / GROUND LIGHTS
The step lights and/or ground lights shall be supplied and installed by the cab/chassis manufacturer. Light(s) shall be
capable of providing illumination at a minimum level of 2 fc (20 lx) on ground areas within 30 in. (800 mm) of the edge of
the vehicle in areas designed for personnel to climb onto or descend from the vehicle to the ground level.
Lighting designed to provide illumination on areas under the driver and crew riding area exits shall be switchable but
activated automatically when the exit doors are opened.
CAB SPOTLIGHT
There shall be one (1) GOLIGHT model 2049 installed on the center top of the specified lightbar. The wireless controls
shall be located on the officer side of the center dash panel area.
ROOF MOUNT LED FLOODLIGHT
One (1) Fire Research Focus LED model FCA830-Q13 roof mount light shall be installed. The lower mounting bracket
shall allow the bottom of the lamphead to pivot and the upper mounting bracket shall extend out on a turnbuckle that is
adjustable to set the lamphead angle. Wiring shall extend from a weatherproof strain relief at the rear of the lamphead.
The lamphead shall have ten (10) ultra-bright white LEDs. It shall operate at 12/24 volts DC, draw 13/6.5 amps, and
generate 13,300 lumens. The lamphead shall direct 50 percent of the light onto the action area while providing 50 percent
to illuminate the working area. The lamphead angle of elevation shall be adjustable at a pivot in the mounting arm and the
position locked with a round knurled locking knob. The lamphead shall incorporate heat-dissipating fins and be no more
than 4 3/4" high by 11 1/2" wide. The lamphead and mounting arm shall be powder coated white. The floodlight shall be
for fire service use.
The lights shall be switched at the 12 volt control panel in the cab.
REAR SCENE LIGHTS
Two (2) Code 3 88Z26 (9"x 7") recess mounted, 50 watt, halogen scene lights with a 26 degree lens and chrome flange
shall be provided on the rear of the apparatus body.
The lights shall be switched at the 12 volt control panel in the cab.
The rear scene lights shall also be activated when the apparatus is in reverse.
TRAFFIC DIRECTIONAL LIGHT
A custom designed traffic directional light shall be provided in the rear edge of the hose bed doors. The directional light
shall consist of eight (8) Code 3 model LXEX1F-A amber LED lights mounted four (4) per side. The traffic directional light
control shall be located in the Vista display in the cab within easy reach of driver.
 The traffic directional light shall be surface mounted to the rear edges of the hose bed doors on the upper rear body.