Pacer Headquar ters 1555 Apex Road • Sarasota, FL 34240 Florida West Coast: 941-378-5774 Florida East Coast: 954-462-0902 Toll Free: 1-800-424-9549 Fax: 941-379-9015 NMEA 2000® Network Cables & Connectors Ft. L auderdale, FL Pacer Group is proud to announce the launch of our new website: www.PacerGroup.
LOCATIONS CORPORATE HEADQUARTERS 1555 Apex Rd. Sarasota, FL 34240 800-424-9549 941-378-5774 FAX: 941-379-9015 Sales/Customer Service: e-mail: websales@pacergroup.net (Accounting, OEM Sales, Distribution, Wire Manufacturing, Engineering) Harness / PANEL DIVISIon 2515 Commerce Court Bowling Green, FL 33834 863-773-3914 EAST COAST FLORIDA DISTRIBUTION 3303 SW 11th Ave. Ft. Lauderdale, FL 33315 800-634-5031 954-462-0902 FAX: 954-763-8062 Sales/Customer Service: e-mail: scacioppo@pacergroup.
Table of Contents WIRE AND CABLE UL Boat Cable .................................................................................3 UL Round Boat Cable ..................................................................4 UL Battery Cable ............................................................................5 UL Primary Wire .............................................................................6 SAE Primary Wire ...........................................................................
QUICK LOOK-UP PICTORIAL INDEX BOAT CABLE Page 3 - 4 BATTERY CABLE Page 5 PRIMARY WIRE Page 6 STO CABLE Page 8 DEVICE NET CABLES Page 9-10 COAXIAL CABLES Pages 12-14 MULTI-CONDUCTOR SHIELDED CABLES Page 15 - 17 AUDIO CABLES Page 18 HEAT SHRINK TUBING Page 19 - 20 WIRING DUCT Page 21 SKINTOP LIQUID TIGHT CONNECTORS Page 24 CABLE TIES Page 26 - 27 TERMINALS Page 29 - 33 SEALED CONNECTOR SYSTEMS Page 34 - 35 LUGS Page 36 - 38 BATTERY INSULATOR BOOTS Page 39 I.D.
BOAT CABLE WIRE & CABLE 105˚C DRY 75˚C WET (BC-5W2) 600V TINNED COPPER FLAT CONSTRUCTIONS Pacer stocks over 50 different marine boat cable constructions. Our stock includes both flat and round configurations with varying conductor and jacket colors. Pacer’s boat cable has become the choice for hundreds of boat builders due to our extensive stock and quick shipments. Our manufacturing process extrudes a flexible yet tough PVC jacket.
ROUND BOAT CABLE WIRE & CABLE 105˚C DRY 75˚C WET 600V TINNED COPPER - ROUND CONSTRUCTIONS Round boat cables allow for easy installation where tight twists and turns are common. Many installers prefer the use of round cables as they are easier to organize and leave a more presentable, finished installation. NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES HEAT SHRINK TUBING ROUTING/ BUNDLING MATERIALS CABLE TIES/ TAPES TERMINALS MOISTURERESISTANT CONN. LUGS & BOOTS I.D.
MARINE BATTERY CABLE WIRE & CABLE 105˚C DRY 75˚C WET 600V TINNED COPPER One of the primary concerns of professional marine electricians is cable flexibility. Marine applications are characteristically in enclosed areas with sharp turns. The less flexible the cable, the more difficult the job will be. The two factors affecting a cable’s softness are its stranding and its insulation.
MARINE PRIMARY WIRE WIRE & CABLE 105˚C DRY 75˚C WET 600V TINNED COPPER Pacer’s primary wire meets and exceeds the most stringent marine specification - UL Standard 1426 BC-5W2 (105˚C Dry 75˚C Wet). Our wire is constructed from finely stranded tinned plated copper and is covered with a flexible PVC insulation. Our extensive stock, quick shipments, uncompromising quality and competitive prices have made us a standard in the industry. NETWORK CABLE COAX CABLE & CONN.
SAE PRIMARY WIRE WIRE & CABLE (GPT) J1128 & J378 105˚C 50V General Purpose Thermoplastic (GPT) insulated primary wire conforms to SAE specifications J1128 and J378. Insulated with 105˚C PVC. GPT is intended for 50V or less applications. The polyvinyl chloride insulation provides excellent resistance to moisture, acids, alkalis, oil, gasoline, flame and abrasion. Pacer stocks GPT primary wire in all colors and gauge sizes from 16 through 8 awg. Put-up sizes are 100ft., 500ft. and 1000ft.
SAE BATTERY CABLE WIRE & CABLE (SGT) J1127 & J378 105˚C 50V Starter or Ground Thermoplastic (SGT) insulated battery cable conforms to SAE specifications J1127 and J378. Insulated with 105˚C PVC. SGT is intended for 50V or less applications. The polyvinyl chloride insulation provides excellent resistance to moisture, acids, alkalis, oil, gasoline, flame and abrasion. NETWORK CABLE COAX CABLE & CONN.
NEW PRODUCT! NMEA 2000® DEVICENET™ CABLES AND CONNECTORS NMEA 2000® Overview Ships and boats are outfitted with suites of electronics including everything from FEATURES and SPECIFICATIONS: computers and GPS to depth sounders and nautical chart data on diskette. The National • Vibration resistance Marine Electronics Association (NMEA) has introduced a new standard (NMEA 2000) for • Temperature Rating -20C to 105C data communication among shipboard electronic devices.
NEW PRODUCT! WIRE & CABLE DEVICENETTM MINI-C CABLES AND CONNECTORS MICRO-CHANGE CORDSET, NICKEL BRASS, THIN, DEVICENET NETWORK CABLE COAX CABLE & CONN. LENGTH EXTENSION MALE/FEMALE PART NUMBER 0.5 M (1.64') 1 M (3.28') 2 M (6.56') 3 M (9.84') 6 M (19.
CAT 5E ENHANCED PART NUMBER M24/4PR-CAT5E M24/4PRS-CAT5E • *ETL verified for ISO 11801 Category 5 • ETL Verified for TIA/EIA 568B Category 5E TYPE 4 4 AWG (STRANDING COLOR NEC TYPE) 24 (SOLID BARE) GREY CMR/MPR 24 (7/32)TINNED GREY CM WEIGHT (LBS) 1000 FT PULLOUT 26lb/kft. 1000 FT PULLOUT 26lb/kft. 4 4 24 (SOLID BARE) 26 (7/34)TINNED 1000 FT PULLOUT 1000 FT PULLOUT PAIRS UNSHEILDED UNSHEILDED M24/4PRF-CAT5* OVERALL SHEILD M2/4PRFS-CAT5E OVERALL SHEILD GREY GREY CM/MP CM PACKAGING 26lb/kft.
COAXIAL CABLES WIRE & CABLE Pacer stocks a wide variety of coaxial cables, including most standard configurations as well as specialized constructions created for marine environmental conditions. Let us help you find the proper cable for your application. NETWORK CABLE 50 OHM COAXIAL CABLES COAX CABLE & CONN. PART NUMBER COND. AWG INSUL. MATERIAL SHIELD COVERAGE JKT. MATERIAL/ NOM. O.D. MULTICONDUCTOR TERMINALS MOISTURERESISTANT CONN. Black PVC .405 29.5 96.
NEW PRODUCT! WIRE & CABLE LMR® CABLES LMR Cables are high performance broadband, flexible, low loss 50 and 75 Ohm coaxial communication cables designed for use on wireless applications such as: • 2-way land mobile • IEEE, 802.11a & 802.11b • Cellular • Wireless local loop • Wireless Internet (WISP) • Broadband wireless data • Telemetry LMR cables have RF performance comparable to traditional corrugated copper cables, but, unlike corrugated cables, they are highly flexible, non-kinking.
COAXIAL CABLE CONNECTORS WIRE & CABLE NETWORK CABLE COAX CABLE & CONN.
MULTI-CONDUCTOR SHIELDED CABLES Multi-conductor shielded cables are primarily used to provide R.F. interference protection. Their applications range from internal and external interconnection of electronic equipment to data transmission and signaling systems. Unless otherwise specified, all of our shielded cables have 100% aluminum/polyester foil tape with a 25% overlap and a stranded tinned copper drain wire.
WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR MULTI-PAIRED SHIELDED AND INDIVIDUALLY FOIL SHIELDED CABLES Multi-paired shielded cables are specialty cables designed to be used where total isolation of signal is required. Pacer offers a variety of paired cables for a wide range of applications. Twisted paired cables are used to mitigate magnetic noise from sources such as AC motors or transformers.
MULTI-CONDUCTOR CABLES Pacer stocks a large variety of cables ranging from 16 gauge to 22 gauge, with the number of individual conductors varying from 2 to as many as 25. These cables are used for control purposes such as remote signaling as well as communications and broadcast applications. Our multi-conductor cables are insulated with PVC (polyvinyl chloride). Conductors are tinned for excellent corrosion resistance. These cables are manufactured to meet the latest UL, CSA and NEC requirements.
CRYSTAL SERIES AUDIO OXYGEN FREE WIRE & CABLE Crystal series home theater audio cables are designed for theater and concert hall quality sound reproduction COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES APPLICATIONS: High end audio transmission, stereo, professional sound and studio requirement.
3-TO-1 ADHESIVE LINED, HIGH SHRINK RATIO 3- to-1 is a semi-flexible, cross-linked polyolefin tube which possesses a meltable inner lining of adhesive that flows when heated. In addition to insulation and mechanical protection, this tubing provides a moisture-proof seal for encapsulation of wires, splices, breakouts, and components. WIRE & CABLE NETWORK CABLE APPLICABLE SPECIFICATIONS: AMS 3634 MIL-I-23053/4 - Class 3 FEATURES: • 3:1 Shrink ratio.
2-TO-1 FLEXIBLE, MULTI-PURPOSE WIRE & CABLE BHS is made from a cross-linked polyolefin offering excellent electrical, chemical and physical properties. BHS is excellent for insulation, harnessing, strain relief and identification purposes. NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES HEAT SHRINK TUBING ROUTING/ BUNDLING MATERIALS CABLE TIES/ TAPES TERMINALS MOISTURERESISTANT CONN. LUGS & BOOTS I.D.
WIRING DUCT Wire management, protection and organization becomes simplified with the use of slotted wall wiring duct. The restricted slot design allows wires to be added or removed by simply deflecting the fingers on the side of the duct. The restricted slot then retains the wire preventing their accidental removal. Wiring duct is unique in that wires can be easily added and removed at any time. The cover is flush with the base for mounting in tight areas. Constructed from rigid PVC.
SPIRAL WRAP WIRE & CABLE Spiral wrap provides abrasion protection for wire and cable insulation as well as hydraulic and pneumatic tubing. Excellent for harnessing multiple cables into a single manageable bundle. Spiral wrap is also handy for kink-proofing all types of tubing. The spiral cut allows for expandability, easy wire breakouts at any point and excellent flexibility. For maximum abrasion resistance, butt the edges together while installing; for flexibility, leave a gap between the edges.
NEW PRODUCT! WRAPPABLE SPLIT BRAIDED TUBE WIRE & CABLE FLEXIBLE, SEMI-RIGID WRAPPABLE SPLIT BRAIDED TUBE F6’s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (velcro, tape, etc.
SKINTOP® II LIQUID TIGHT CONNECTORS WIRE & CABLE SKINTOP® II Liquid tight, non-metallic strain relief connectors are an easy method of sealing out moisture from electrical boxes or between bulkheads. SKINTOP® II connectors meet the most stringent demands of safety and operational reliability. The internal ratchet mechanism allows the cap to be tightened without twisting the cord as it compresses. An integrated locking system prevents the cap from loosening even when subjected to severe vibration.
STAINLESS-STEEL CUSHION CLAMPS Stainless-Steel Cushion Clamps are designed for mounting wires, cables or hoses where weight and vibration are a factor. Stainless-steel clamps offer strength and durability. BSSC are composed of 321 stainless steel with black neoprene cushions for protection of harnesses or hoses. Neoprene cushions also serve to dampen vibrations. The strength and corrosion resistance of stainless-steel combined with the protection of neoprene provide a long–term, reliable mounting solution.
WIRE & CABLE CABLE TIES Cable ties are the most widely used and versatile bundling and harnessing material available. Pacer offers a wide selection of both size and capacity. Cable ties are stocked in natural 6/6 nylon and weather resistant, UV stabilized, black 6/6 nylon. Sizes range from ties with a maximum of 1 inch diameter to ties that have a diameter up to 9 inches. NETWORK CABLE COAX CABLE & CONN.
STAINLESS STEEL CABLE TIES Stainless steel cable ties offer reliable, long-lasting performance in severe environmental conditions. Perfect for outdoor applications, they offer excellent resistance to abrasion, weathering, corrosion and temperature extremes. Stainless steel cable ties have fully rounded sides that are safe to handle and safe for wires. For added abrasion protection, black neoprene rubber cushion sleeves are available on 100 ft. reels.
WIRE & CABLE DUAL LOCK 3M Dual Lock is a 1" wide, self-adhering, reclosable fastening system. 3M stem type locking system is five times stronger than conventional hook and loop fasteners. The adhesive backing will adhere instantly to many surfaces. When pressing together, an “audible” snap assures secure closure. Part Number: BDLOCK-BK 2 - 1" wide rolls, 1@170 stems, 1@400 stems. 4.9 yards each. NETWORK CABLE ORDERING INFORMATION: Available in mini packs of 4.9 yards. COAX CABLE & CONN.
PART NUMBER SYSTEM T TERMINAL TYPE T = RING, FORK or PIN TAE = TINNED CLOSED END LUGS TBS = BUTT SPLICE TC, TL, TF = BATTERY TERMINALS TD = DISCONNECTS TB = BULLETS TL = BRAZED LUGS NF 14 INSULATION BLANK = NON-INSULATED E = ADHESIVE HEAT SHRINK N = NYLON NF = NYLON, FUNNEL ENTRY w/INSULATION SLEEVE V = VINYL, FUNNEL ENTRY NYLON INSULATED TERMINALS WITH INSULATION GRIP SLEEVE - 10 WIRE RANGE 18 = #22-18 AWG 14 = #16-14 AWG 10 = #12-10 AWG 8 = #8 AWG 6 = #6 AWG 4 = #4 AWG 2 = #2 AWG 1 = #1 AWG 1/0 =
HEAT SHRINKABLE TERMINALS WIRE & CABLE Heat shrinkable terminals have quickly become the most requested connector among marine professionals. The ease and speed by which these connectors create a fully environmentally sealed connection is unmatched. Heat shrink terminals are constructed from high-grade, fully annealed, tinned plated copper with a brazed barrel seam. The insulation is a tough, quick-to-shrink polyolefin. NETWORK CABLE FEATURES: COAX CABLE & CONN.
DISCONNECTS Also known as quick connect or slip-on connectors. Connection is accomplished by fitting the female part over the male tab. Holding force is excellent due to an indentation on the tongue of the female part which locks into a hole on the male tab. Available in non-insulated brazed seam, partially insulated vinyl (covers wire barrel only) or fully insulated nylon. WIRE & CABLE NETWORK CABLE COAX CABLE & CONN.
RING TERMINALS Rings terminals are available in three configurations; nylon insulation grip, funnel entry vinyl, and non-insulated terminals. Ring terminals are the most secure type of tongue style because they cannot slip off a screw or stud. They should be used on all critical circuits. WIRE & CABLE NETWORK CABLE WIRE STUD RANGE SIZE 22-18 AWG #6 #8 #10 1/4" 5/16" 3/8" 16-14 AWG #6 #8 #10 1/4" 5/16' 3/8" 1/2" 12-10 AWG #6 #8 #10 1/4" 5/16" 3/8" 1/2" COAX CABLE & CONN.
BUTT SPLICES For use whenever two wires need to be connected. Available in three styles: premium nylon insulated, vinyl insulated and non-insulated. Non-insulated butt splices have a brazed seam to prevent separation during crimping. All butt splices have a bell shaped wire entry with a serrated inner barrel for added pull-out strength.
DEUTSCH DTM, DT AND DTP SERIES CONNECTORS WIRE & CABLE FEATURES: Deutsch DTM and DT Series of environmentally-sealed connectors are designed for cable to cable applications, where signal level circuits must withstand harsh conditions. DTM and DT series connectors will provide reliability and performance at low cost. DTP series connectors deliver environmentally-sealed performance for power applications. NETWORK CABLE COAX CABLE & CONN. MACHINED CONTACTS AWG CONN.
NEW PRODUCT! DELPHI WEATHER PACK CONNECTORS WIRE & CABLE Delphi Weather Pack Connectors are environmentally sealed electrical connections designed to withstand exposure to extreme temperatures and moisture. WEATHER PACK–TERMINALS Male Terms MALE TERMINALS (FOR SHROUD HOUSING) P/N FEMALE TERMINALS (FOR TOWER HOUSING.) P/N WIRE RANGE PKG QTY T12089188 T12124580 T12124581 20-18 16-14 12 50 50 50 T12049040 T12124582 T12124587 Female Terms BENEFITS: COAX CABLE & CONN.
TINNED PLATED “CLOSED END” LUGS WIRE & CABLE General purpose seamless electrical terminals. Made from 100% pure electrolytic copper, fully annealed to prevent cracking while being crimped and while in service. Tinned plated for optimum corrosion resistance. All lugs have a flared “bell” shaped entry to facilitate wire insertion. Pacer’s closed end lugs are uniquely made so that there is no exposed seam on the outside of the terminal. FEATURES: • Tinned plated, E.T.P.
BRAZED SEAM TINNED BATTERY LUGS Made from pure electrolytic copper for high conductivity and electro-plated with tin for maximum corrosion protection. Wire barrels are silver alloy brazed, allowing the lug to be crimped anywhere, even on the seam, without splitting. The inside of the barrel is serrated with “V” grooves, which when crimped, grip the wire adding to the holding power. These lugs are very sturdy and durable even in the most demanding conditions. NON-INSULATED FEATURES: • Tinned plated, E.T.P.
BATTERY POST LUGS WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES HEAT SHRINK TUBING ROUTING/ BUNDLING MATERIALS CABLE TIES/ TAPES All battery terminals are cast using 131 contact copper which is 93% to 95% copper. They are electro-plated with a bright tin finish. Each terminal has raised letters to provide legibility of important information such as wire size and post type. Our battery terminals are sand cast which makes them more durable and reliable than die cast parts.
BATTERY INSULATOR BOOTS Battery terminal insulators increase product safety by preventing electrical shorts and shock, avoiding injury and potential liability. Additionally, the use of terminal insulators assures customers that your product was designed with the highest standards of quality. Protective boots and caps extend battery life by protecting against corrosion. Constructed from durable, heavy-duty PVC. Available in straight, marine, and alternator type.
TERMINAL BOXES WIRE & CABLE Scoop type compartment boxes are a handy way of organizing and neatly transporting terminals, screws and all types of fasteners. Two types of boxes are available. METAL Metal boxes are made of prime cold–rolled steel, finished with rust and acid–resistant baked enamel (gray). Both the large and small boxes have 21 compartments with one long compartment for tool storage. A catch type latch keeps the lid secure.
NEW PRODUCT! PROFESSIONAL LABELING TOOLS Part Number VT-3000 Part Number VT-5200 Part Number VT-6000 WIRE & CABLE RHINO 3000 HARD CASE KIT RHINO 3000 is an easy-to-use portable label printer specifically developed for high-end installations at the job site or home: security, low-voltage networking, home automation, professional audio/video and much more.
MARKER BOOKS WIRE & CABLE For convenience and portability, pocket size marker books are an economical and handy way to utilize the benefits of wire markers. The markers are composed of impregnated vinyl cloth to resist solvents. A 1/4" long, terminal block marker is provided for each full length marker. Each book contains 10 pages. PART NO. NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES HEAT SHRINK TUBING ROUTING/ BUNDLING MATERIALS CABLE TIES/ TAPES TERMINALS MOISTURERESISTANT CONN.
CABLE CUTTERS These economical tools can handle most cable cutting jobs easily. Curved shear edges allow for a clean, efficient cut without compression or fraying ends. The VT63050 is capable of cutting up to 2/0 battery cable yet the cutter is only 9 1/2" long. The VT63055 is 8" long and has a compact cutting head for use in tight areas. (Tools are not designed for cutting steel or ACSR.
IDEAL STRIPMASTER® WIRE & CABLE To assure quality wire stripping time after time, automatic strippers have been the accepted standard in the industry for over thirty years. Gripper pads clamp down and securely hold wire while precision cutting blades strip and remove the insulation. The controlled, one-step process greatly reduces the chance of conductor damage. VT45-292 NETWORK CABLE VT45-265 & VT45-262 COAX CABLE & CONN.
KLEIN® CRIMP TOOLS VT1006 WIRE & CABLE Sturdily built from hardened steel, these crimpers have a tapered nose for work in confined areas as well as a specially hardened wire cutter on the tip. This tool is a favorite among marine repair professionals because of its unsurpassed reliability, and ease of use. The VT1005 and VT1006 are our most economical cutter crimpers.
Ultratorch® WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR Ultratorches are multipurpose portable soldering irons, butane torches and flameless heat tools. They are completely cordless, running on refillable butane fuel. Excellent for field maintenance and repairs. P/N: VUT-100Sik The 100Si is a self-igniting butane heat tool. It comes complete with one ejector for soldering, a soldering and heat tip, a spanner wrench, open end wrench, shrink attachment and protective cap.
Self-Igniting Trigger Torch VMT-76 VMT-76 is a professional hand-held or table top, butane powered, self-igniting trigger torch, soldering iron and flameless heat tool. Comes complete with soldering tip and heat tip. P/N: VMT-76 WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. Pocket Sized Micro Torch VMT-5 MULTICONDUCTOR VMT-5 is a pocket sized, butane powered microtorch with self-igniting trigger. It is wind resistant, has adjustable flame and comes with safety lock and cap.
MAGNETIC CIRCUIT BREAKERS “A” FRAME WIRE & CABLE Magnetic circuit breakers offer a low cost answer to power switching and reliable circuit protection. Temperature will not effect the operation of magnetic circuit breakers, as is the case with thermal breakers or fuses. The opening of the circuit is accomplished by the amount of current passing through an electromagnetic coil. As the current exceeds the amount specified by the breaker the circuit will open. (See chart, “Percentage overload vs. trip time.
MAGNETIC CIRCUIT BREAKERS “C” FRAME Designed for use in the industrial, military and marine applications. “C” frame breakers are suitable for use in any situation where precision operation is required. Magnetic circuit breakers are a low cost answer to power switching and reliable circuit protection. Temperature will not affect the operation of magnetic circuit breakers, as it does with thermal breakers or fuses. Available in DC-50/60Hz through 50 Amps and DC above 50 amps.
WIRE & CABLE BREAKER TOGGLE GUARD Protects critical function circuits from being accidentally switched off at the breaker. Fits all “A” frame breakers. Mounts on the surface of the panel with 2, 6-32 x 3/8" mounting screws (included). P/N: EG6-GUARD ORDERING INFORMATION: Available by the piece. NETWORK CABLE COAX CABLE & CONN. EG6-GUARD AC LOCKOUT SLIDES MULTICONDUCTOR AUDIO CABLES HEAT SHRINK TUBING AC Lockout slides allow only one AC circuit breaker to be activated at a time.
PANEL MOUNT THERMAL BREAKERS SERIES 658: Economical, series trip, thermal breakers. White or black actuators. SERIES 45: Cost effective, series trip, thermal breakers with ON/OFF switching. SERIES 41: Series trip, thermal breakers with ON/OFF switching. Corrosion, humidity and fungus resistant housing. Ampere ratings to 70 AMPS. WIRE & CABLE SERIES 658 NETWORK CABLE SERIES 41 COAX CABLE & CONN.
BUSSMANN SERIES 187 MRCB MARINE RATED CIRCUIT BREAKERS WIRE & CABLE Series 187 MRCB breakers provide high amperage (25-150 AMPS) circuit protection where panel mounting can be difficult. Surface mount breakers combine manual switching and reliable circuit protection into one unit. “Trip-free” and Vapor proof (conforming to SAE J1171), they are safe for installation aboard gas powered boats.
ANL TYPE FUSES, FUSE HOLDERS AND BLOCKS ANL FUSES FEATURES: • Low voltage limiter, 32Volts AC or Less • Interrupt Capacity: 6,000 AMPS • Isolates faults in battery operated systems. • Silver-plated copper links • Link element visible through mica window. BUSSMANN 4164 P/N: EFB-ANL FEATURES: • Single-pole, stud terminal • Molded thermoplastic base • Two countersunk mounting holes on 1-in centers for #10 flat head screws • Tightening torque is 120 in-lbs • 125V • L 3.38” x W 0.95” x H 1.
WIRE & CABLE AGC TYPE GLASS FUSES AND FUSE HOLDERS FEATURES: • Dimensions: 1/4" dia. By 1-1/4" long NETWORK CABLE ORDERING INFORMATION: Order by multiples of 5. COAX CABLE & CONN. MULTICONDUCTOR RATED AMPS PART NUMBER .5 1 1.5 2.5 3 5 7.5 10 15 20 25 30 EAGC.5 EAGC1 EAGC1.5 EAGC2.5 EAGC3 EAGC5 EAGC7.5 EAGC10 EAGC15 EAGC20 EAGC25 EAGC30 BLOCK SYSTEM Blue Sea Systems offers a unique, long lasting, fuse block. The fuse block utilizes all nickel-plated metal components.
ATO/ATC TYPE FUSES FEATURES: • Standard 1/4" blade type automotive fuses. ORDERING INFORMATION: Order by multiples of 5. RATED AMPS PART NUMBER COLOR 1 3 5 7.5 10 15 20 25 30 EATC1 EATC3 EATC5 EATC7.5 EATC10 EATC15 EATC20 EATC25 EATC30 BLACK VIOLET TAN BROWN RED LT. BLUE YELLOW NATURAL LT.
TERMINAL BLOCKS WIRE & CABLE Flat mount terminal blocks are used extensively in the marine industry for a variety of purposes, including: simplifying wiring work, eliminating splicing, stopping short circuits, etc. Commonly used in panels, electronic and electrical equipment, and in wire harnesses. Pacer stocks double row terminal blocks composed of general purpose Phenolic with nickel plated brass hardware for maximum life span in marine environments.
BUS BARS Pacer stocks a wide variety of bus bars for many uses, including 500 and 600 AMP continuous rated power buses. Improper or corroded buses can rob precious voltage from a circuit. In starter and anchor windlass circuits where hundreds of amps flow, this could mean a big difference in cranking/lifting capability. Connect all high amperage cables securely.
DUAL BUS COMMON BUSES PART CURRENT COVER NUMBER RATING CONFIGURATION PART NUMBER (AMPS) EDB10 100 DUAL BUS, 5 x 8-32 SCREWS EACH SIDE EDB10C EDB20 100 DUAL BUS, 10 x 8-32SCREWS EACH SIDE EDB20C WIRE & CABLE NETWORK CABLE COAX CABLE & CONN.
MAXI BUS BARS PART NUMBER STUD TYPE CURRENT RATING (AMPS) CONFIGURATION COVER PART NUMBER EMXB2-12 EMXB4 (2) 5/16” (4) 5/16” 250 250 BUS w/2 POSTS AND 12 (#10) SCREWS BUS w/4 POSTS EMXBC EMXBC WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. EMXB4 EMXB2-12 MULTICONDUCTOR AUDIO CABLES EMXBC HEAT SHRINK TUBING POWERBAR Blue Sea Systems power bar is a unique high amperage power distribution bus. Constructed from tinnedplated CDA110 copper with a GE Lexan polycarbonate base.
TYPICAL USES FOR SWITCHES ON BOATS WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES ON-OFF Accessories Auto-Pilot Bilge Pumps Pre-Heat Converter Deck Wash Pump Depth Finder Loran Radios Recorder Stereo Water Pressure OFF-(ON) ON-(OFF) Horn Alarm Silence Head Flush Macerator CABLE TIES/ TAPES TERMINALS I.D.
V-SERIES CONTURA II & III CHARACTERISTICS: • Base Material: Polyester • Dielectric Strength 2000V RMS • Insulation Resistance 50 MegOhms • Rating: 20A 12V CERTIFICATIONS: UL and CSA Tested in accordance with requirements of MIL STD 202F The V-Series CONTURA II and III versions, with sealed front panel components, are certified to IP66 and IP68, signifying complete protection against dust, prolonged spray and submersion under pressure.
NEW PRODUCT! WIRE & CABLE SCREENED CONTURA II ACTUATORS Actuators are silk screened with a durable white ink that contains both the function and its associated ISO symbol Part Number: NETWORK CABLE COAX CABLE & CONN.
BATTERY SWITCHES WIRE & CABLE Blue Sea Systems compact high-amperage switches are vapor/ignition protected and UL listed. M-Series Battery Switches NETWORK CABLE 300 Amperes continuous rating for outboard and small inboard gasoline engines FEATURES: • Case design allows surface, front panel or rear panel design. • 3/8” M10 Tin-plated copper studs • 7/8” long studs • Accepts up to 4/0 battery cable (Clearance 1.12”) • All non-corrosive marine grade metals EBS-6006 RATINGS Intermittent Rating: 5 min.
HD-Series Battery Switches WIRE & CABLE Up to 600 Amperes continuous rating for large diesel engines, high power output, and low heat generation. FEATURES: • Case design allows for surface or rear panel mount design. • 1/2” M12 Tin-plated copper studs • 7/8” long studs • Accepts up to 4/0 battery cable (Clearance 1.10”) • All non-corrosive marine grade metals • Fits Perko and Guest low amperage battery switch hole patterns • Luminous label for low light reading NETWORK CABLE COAX CABLE & CONN.
L-SERIES SOLENOID SWITCH WITH COIL ECONOMIZER PN: ESOL-9012 250 Ampere Classs 12/24 Volt.
INDICATOR LIGHTS WIRE & CABLE NETWORK CABLE E3L COAX CABLE & CONN. MULTICONDUCTOR AUDIO CABLES HEAT SHRINK TUBING ROUTING/ BUNDLING MATERIALS CABLE TIES/ TAPES TERMINALS MOISTURERESISTANT CONN. 3L Series are compact style lights that snap-fit into a 5/16" hole and are secured with a spring clip. Long body style with a built in resistor, 3L lights are constructed with Dupont Zytel 132F with a 14, 28, and 125 volt incandescent bulb, flush type mount, and a translucent lexan lens.
DC VOLT METERS METER DIMENSIONS WIRE & CABLE NETWORK CABLE COAX CABLE & CONN.
JUNCTION BOXES AND ENCLOSURES WIRE & CABLE NETWORK CABLE COAX CABLE & CONN. MULTICONDUCTOR Fiberglass reinforced polyester enclosures are designed for use as electrical junction boxes in highly corrosive environments such as marine installations. Enclosures are also suitable as instrument housings in both indoor and outdoor applications. Window enclosures provide easy visual inspection of interior components.
CONVERSION FACTORS ENGLISH/METRIC METRIC/ENGLISH LENGTH AREA VOLUME Inch x 25.40 = Millimeters Sq. Inch x 6.452 = Sq. Centimeter Cu. Inch x 16.39 = Cu. Centimeter Ounce x 28.35 = Gram Millimeters x 0.03973 = Inches Sq. Centimeter x 0.155 = Sq. Inch Cu. Cm. x 0.06102 = Cu. Inch Gram x 0.03527 = Ounce Feet x 0.3048 = Meters Sq. Foot x 0.0929 = Sq. Meter Cu. Foot x 0.02832 = Cu. Meter Pound x 0.4536 = Kilogram Meters x 3.281 = Feet Sq. Meter x 10.76 = Sq. Foot Cu. Meter x 35.31 = Cu.
TABLE 2: CONDUCTOR SIZES FOR 3% DROP IN VOLTAGE - 12 AND 24 VOLTS 12 VOLT - BASED ON MINIMUM CIRCULAR MIL (CM) AREA Technical Reference LENGTH 10 15 20 25 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 5 18 16 14 12 12 10 10 10 8 8 8 6 6 6 6 6 6 6 6 TOTAL CURRENT ON CIRCUIT IN AMPS 10 14 12 10 10 10 8 6 6 6 6 4 4 4 4 2 2 2 2 2 15 12 10 10 8 8 6 6 6 4 4 2 2 2 2 2 1 1 1 1 20 10 10 8 6 6 6 4 4 2 2 2 2 1 1 1 1/0 1/0 1/0 2/0 25 10 8 6 6 6 4 4 2 2 2 1 1 1/0 1/0 1/0 2/0 2/0 2/0 3/0 30 10 8 6 6 4 4 2
TABLE 5A & B A: CIRCUIT BREAKER INTERRUPTING CAPACITY (AMPS) ABYC TABLE V.B E-11.16 SHORE POWER 120V - 30A 120V - 50A AMPS MAIN BREAKER SHORE POWER DISCONNECT BREAKER BRANCH BREAKER 30A 50A 3,000 3,000 3,000 3,000 NOTE 1: The main circuit breaker is considered to be the first circuit breaker connected to a source of AC power. All subsequent breakers, including sub-main breakers, connected in series with a main circuit breaker shall be considered to be branch circuit breakers.
Technical Reference NOTES: Pacer Group is proud to announce the launch of our new website: www.PacerGroup.net Why shop online? • • • • • • • • Exclusive pricing for web members only! Access to thousands of products online Shop 24 hours a day Create custom shopping carts and save them for future duplicate orders and bidding projects Track your shipments View invoice history View quantity price breaks Members receive emails regarding new products and promotional pricing ...
LOCATIONS CORPORATE HEADQUARTERS 1555 Apex Rd. Sarasota, FL 34240 800-424-9549 941-378-5774 FAX: 941-379-9015 Sales/Customer Service: e-mail: websales@pacergroup.net (Accounting, OEM Sales, Distribution, Wire Manufacturing, Engineering) Harness / PANEL DIVISIon 2515 Commerce Court Bowling Green, FL 33834 863-773-3914 EAST COAST FLORIDA DISTRIBUTION 3303 SW 11th Ave. Ft. Lauderdale, FL 33315 800-634-5031 954-462-0902 FAX: 954-763-8062 Sales/Customer Service: e-mail: scacioppo@pacergroup.
Pacer Headquar ters 1555 Apex Road • Sarasota, FL 34240 Florida West Coast: 941-378-5774 Florida East Coast: 954-462-0902 Toll Free: 1-800-424-9549 Fax: 941-379-9015 NMEA 2000® Network Cables & Connectors Ft. L auderdale, FL Pacer Group is proud to announce the launch of our new website: www.PacerGroup.
