Technical information

WIRE & CABLE
NETWORK
C
ABLE
COAX CABLE
& CONN.
MULTI-
CONDUCTOR
AUDIO CABLES
HEAT SHRINK
TUBING
ROUTING/
BUNDLING
MATERIALS
CABLE TIES/
T
APES
TERMINALS
MOISTURE-
RESISTANT
CONN.
LUGS & BOOTS
I.D. PRODUCTS
& LABELERS
TOOLS
BREAKERS
& FUSES
TERMINAL
BLOCKS
& B
US BARS
SWITCHES
SOLENOIDS
ACR’S
LIGHTS
& METERS
ENCLOSURES
PACER GROUP  SARASOTA
CORPORATE HEADQUARTERS
NA
TIONAL AND OEM SALES
18004249549 • FAX: 9413799015
PACER GROUP  FT. LAUDERDALE
EAST COAST SALES AND
AFTER
MARKET SALES
18006345031 • FAX: 9547638062
21www.pacergroup.net
Group
WIRING DUCT
Wire management, protection and organization becomes simplified with the use of slotted wall
wiring duct. The restricted slot design allows wires to be added or removed by simply deflecting
the fingers on the side of the duct. The restricted slot then retains the wire preventing their
accidental removal. Wiring duct is unique in that wires can be easily added and removed at any
time. The cover is flush with the base for mounting in tight areas. Constructed from rigid PVC.
Duct W x H
2 x (Wire O.D.)
2
PART NUMBER INFORMATION
WIDTH
HEIGHT
LG6 = LT. GRAY
WH6 = WHITE
BG 2 X 4 WH6
WIDTH LG6 = LT. GRAY
WH6 = WHITE
COVERBASE
BDC 2 WH6
ORDERING INFORMATION:
Add: LG6 = for Lt. Gray
WH6 = for White
Sold in 6 ft. lengths.
Cover is ordered separately.
FEATURES:
• Rigid, Non-Flammable Polyvinyl Chloride
• Flammability Rating U.L. 94 V-0
• Temperature up to 50˚C (122˚F)
• Available in White or Light Gray
• Resistant to Acids, Alkalis, Fuels, Oils
• Rounded edges along slots protect wires and hands from abrasion
• Non-slip cover design
APPLICATIONS:
Wiring of electrical control panels where breakouts are
fr
equent and when adding or removing wire is a factor. The
superior product to use when organizing large numbers of
wires into a small, professionally laid out area.
FOR OPTIMAL USE:
Follow the formula below to determine the maximum number of wires used in
various sizes of wiring duct, based on a 50% fill capacity.
Cutting wiring duct is easily achieved by using a fine tooth hand saw for small
quantities. For large quantities use a fine tooth bandsaw or circular saw.
BG1X1 1.00 1.00 26 BDC1
BG1X2 2.00 52
BG2X1 1.00 52
BG2X2 2.00 2.00 104 BDC2
BG3X3 3.00 3.00 233 BDC3
BG4X2 2.00 207
BG4X3 4.00 3.00 311 BDC4
BG4X4 4.00 414
PART
NUMBER
NOMINAL DUCT SIZES
WIDTH INCH HEIGHT INCH
MAX. NUMBER OF
14 AWG WUL
WIRES
COVER
PART NUMBER
SPLIT CONDUIT
BSC Split Conduit is an excellent general purpose cable and harness protector.
Convoluted tubing provides an efficient method for binding wire harness
assemblies, while supplying protection against abrasion, crushing and impact
while reducing wire insulation damage. It is economical and quick to install.
FEATURES:
• Protection from heat, sunlight, salt, friction and vibration • Longitudinally split for easy installation
• Lightweight • Economical
• Operating temperature -20˚C to 93˚C • Available in black UV resistant or white polyethylene
• UL Flammability V-2
PART PART SIZE I.D. RANGE O.D. RANGE STANDARD
NUMBER NUMBER INCHES INCHES PUTUP
BLACK WHITE
BSC1/4 BSC1/4W 1/4" .236-.264 .376-.400 100ft
BSC3/8 BSC3/8W 3/8" .337-.362 .491-.516 100ft
BSC1/2 BSC1/2W 1/2" .484-.509 .670-.695 100ft
BSC5/8 BSC5/8W 5/8" .605-.630 .790-.836 100ft
BSC3/4 BSC3/4W 3/4" .730-.755 .960-.985 100ft
BSC1 BSC1W 1" 1.00-1.039 1.278-1.306 100ft
BSC1.25 N/A 1.125" 1.250-1.276 1.437-1.484 50ft
BSC1.5 BSC1.5W 1.5" 1.500-1.528 1.858-1.925 50ft
BSC2 N/A 2" 1.980-2.035 2.343-2.409 50ft
ORDERING INFORMATION: See standard put-up length.
Now available
in White
Number of wires =