Technical information

PACER GROUP  SARASOTA
CORPORATE HEADQUARTERS
NA
TIONAL AND OEM SALES
18004249549 • FAX: 9413799015
PACER GROUP  FT. LAUDERDALE
EAST COAST SALES AND
AFTER
MARKET SALES
18006345031 • FAX: 9547638062
36 www.pacergroup.net
WIRE & CABLE
NETWORK
C
ABLE
COAX CABLE
& CONN.
MULTI-
CONDUCTOR
AUDIO CABLES
HEAT SHRINK
TUBING
ROUTING/
BUNDLING
MATERIALS
CABLE TIES/
T
APES
TERMINALS
MOISTURE-
RESISTANT
CONN.
LUGS & BOOTS
I.D. PRODUCTS
& LABELERS
TOOLS
BREAKERS
& FUSES
TERMINAL
BLOCKS
& B
US BARS
SWITCHES
SOLENOIDS
ACR’S
LIGHTS
& METERS
ENCLOSURES
Group
TINNED PLATED “CLOSED END” LUGS
General purpose seamless electrical terminals. Made from 100% pure electrolytic copper, fully
annealed to prevent cracking while being crimped and while in service. Tinned plated for optimum
corrosion resistance. All lugs have a flared “bell” shaped entry to facilitate wire insertion. Pacer’s
closed end lugs are uniquely made so that there is no exposed seam on the outside of the terminal.
ORDERING INFORMATION: Order by standard package.
WIRE STUD PART STANDARD
RANGE SIZE NUMBER LENGTH WIDTH CLEARANCE PACKAGE
#8 AWG #10 TAE8-10R-T 1.187 .438 .344 25, 50, 100, 500
1/4" TAE8-14R-T 1.187 .438 .344 25, 50, 100, 500
5/16" TAE8-56R-T 1.187 .438 .344 25, 50, 100, 500
3/8" TAE8-38R-T 1.344 .609 .406 25, 50, 100, 500
1/2" TAE8-12R-T 1.484 .766 .469 25, 50, 100, 500
# 6 AWG #10 TAE6-10R-T 1.266 .438 .344 25, 50, 100, 500
1/4" TAE6-14R-T 1.266 .438 .344 25, 50, 100, 500
5/16" TAE6-56R-T 1.266 .438 .344 25, 50, 100, 500
3/8" TAE6-38R-T 1.406 .609 .406 25, 50, 100, 500
1/2" TAE6-12R-T 1.547 .766 .469 25, 50, 100, 500
# 4 AWG #10 TAE4-10R-T 1.500 .531 .406 25, 50, 100, 500
1/4" TAE4-14R-T 1.500 .531 .406 25, 50, 100, 500
5/16" TAE4-56R-T 1.500 .531 .406 25, 50, 100, 500
3/8" TAE4-38R-T 1.500 .531 .406 25, 50, 100, 500
1/2" TAE4-12R-T 1.688 .766 .469 25, 50, 100, 500
# 2 AWG 1/4" TAE2-14R-T 1.625 .609 .406 10, 25, 50, 100
5/16" TAE2-56R-T 1.625 .609 .406 10, 25, 50, 100
3/8" TAE2-38R-T 1.625 .609 .406 10, 25, 50, 100
1/2" TAE2-12R-T 1.750 .766 .469 10, 25, 50, 100
# 1 AWG 1/4" TAE1-14R-T 1.719 ..692 .406 10, 25, 50, 100
5/16" TAE1-56R-T 1.719 .692 .406 10, 25, 50, 100
3/8" TAE1-38R-T 1.719 .692 .406 10, 25, 50, 100
1/2" TAE1-12R-T 1.719 .692 .469 10, 25, 50, 100
# 1/0 AWG 1/4" TAE1/0-14R-T 1.844 .734 .406 10, 25, 50, 100
5/16" TAE1/0-56R-T 1.844 .734 .406 10, 25, 50, 100
3/8" TAE1/0-38R-T 1.844 .734 .406 10, 25, 50, 100
1/2" TAE1/0-12R-T 1.844 .734 .469 10, 25, 50, 100
# 2/0 AWG 1/4" TAE2/0-14R-T 2.063 .813 .500 10, 25, 50, 100
5/16" TAE2/0-56R-T 2.063 .813 .500 10, 25, 50, 100
3/8" TAE2/0-38R-T 2.063 .813 .500 10, 25, 50, 100
1/2" TAE2/0-12R-T 2.063 .813 .500 10, 25, 50, 100
# 3/0 AWG 1/4" TAE3/0-14R-T 2.172 .906 .500 10, 25, 50, 100
5/16" TAE3/0-56R-T 2.172 .906 .500 10, 25, 50, 100
3/8" TAE3/0-38R-T 2.172 .906 .500 10, 25, 50, 100
1/2" TAE3/0-12R-T 2.172 .906 .500 10, 25, 50, 100
# 4/0 AWG 1/4" TAE4/0-14R-T 2.344 .984 .547 10, 25, 50, 100
5/16" TAE4/0-56R-T 2.344 .984 .547 10, 25, 50, 100
3/8" TAE4/0-38R-T 2.344 .984 .547 10, 25, 50, 100
1/2" TAE4/0-12R-T 2.344 .984 .547 10, 25, 50, 100
Heavy Duty Starter/Battery Lugs with longer barrels and heavier wall thickness are available upon request.
FEATURES:
• Tinned plated, E.T.P. (Electrolytic Tough Pitch) CDA-110, ASTM-B-152 copper, rated at 100% conductivity
• UL and CSA Approved
• No exposed seams