Technical information

PACER GROUP  SARASOTA
CORPORATE HEADQUARTERS
NA
TIONAL AND OEM SALES
18004249549 • FAX: 9413799015
PACER GROUP  FT. LAUDERDALE
EAST COAST SALES AND
AFTER
MARKET SALES
18006345031 • FAX: 9547638062
64 www.pacergroup.net
WIRE & CABLE
NETWORK
C
ABLE
COAX CABLE
& CONN.
MULTI-
CONDUCTOR
AUDIO CABLES
HEAT SHRINK
TUBING
ROUTING/
BUNDLING
MATERIALS
CABLE TIES/
T
APES
TERMINALS
MOISTURE-
RESISTANT
CONN.
LUGS & BOOTS
I.D. PRODUCTS
& LABELERS
TOOLS
BREAKERS
& FUSES
TERMINAL
BLOCKS
& B
US BARS
SWITCHES
SOLENOIDS
ACR’S
LIGHTS
& METERS
ENCLOSURES
Group
BATTERY SELECTOR SWITCHES
Pacer stocks a large variety of battery selector switches. To select the proper battery
switch size, make sure your engine’s cold cranking amperage is lower than the
momentary rating of the switch.
BATTERY SWITCHES
Guest switches feature an innovative “sweep contact” design, which
provides a large, flat surface area for maximum conductivity and efficiency without
the excessive wear, carbon tracking and contact burns of interior line-contact
designs. All Guest battery switches safely provide positive battery disconnect,
isolate all circuits, and conform to U.S.C.G. safety standard 183.410 for ignition
protection.
PART AMPS
NUMBER DESCRIPTIONS DIMENSIONS CONTINUOUS/MOMENTARY
EBS-2111 UNIVERSAL SELECTOR 5.5" DIAMETER x 2.63" DEPTH 230/345
EBS-2112 UNIVERSAL ON/OFF 5.5" DIAMETER x 2.63" DEPTH 230/345
EBS-2300A HEAVY DUTY SELECTOR 5.5" SQUARE x 3.5" DEPTH 450/800
EBS-2303A HEAVY DUTY ON/OFF 5.5" SQUARE x 3.5" DEPTH 450/800
EBS-2304A EXTRA HEAVY DUTY ON/OFF 5.5" SQUARE x 3.5" DEPTH 600/1000
FEATURES:
• Heavy Duty Copper
S
weep Contacts
• Positive Click Stop on
all P
ositions
• For 12, 24, and 32 Volt Systems
• Marine UL Listed
• “Make Before Break” contacts allow selection
• 1 Year Limited Warranty of all positions except “Off” while engine is running
EBS-2111 EBS-2112
EBS-2300A
EBS-2303A/
EBS-2304A
HD-Series Battery Switches
Up to 600 Amperes continuous rating for large diesel engines, high power output, and low heat generation.
FEATURES:
• Case design allows for surface or rear panel mount design.
• 1/2” M12 Tin-plated copper studs
• 7/8” long studs
• Accepts up to 4/0 battery cable (Clearance 1.10”)
• All non-corrosive marine grade metals
• Fits Perko and Guest low amperage battery switch hole patterns
• Luminous label for low light reading
RATINGS EBS3000 EBS3002
Intermittent Rating: 5 min. (UL 1107) 900 Amperes DC 700 Amperes DC
Continuous Rating (UL 1107) 600 Amperes DC 500 Amperes DC
PART NUMBER DESCRIPTION APPLICATIONS
EBS-3000 Single Circuit ON/OFF Switches a single
battery to a single
load group
EBS-3002 Selector Switches battery
bank 1 or battery
bank 2 or BOTH
to a single load
using one switch
EBS-3000
EBS-3002