Kochen mit Startautomatik Kochen mit Startautomatik ist einfach und dazu so praktisch. Gehen Sie folgendermaßen var: Sie wollen den Gasbeginn auf 4:30 heute nachmittags fir eine Dauer von 85 Minuten mit T (FORT KOCHEN] einstellen., “ Vor der Einstellung überprüfen Sie noch einmal, ob die Uhrzeit richtig eingestellt ist. (Nehmen wir an, Sie nehmen die Einstellung um 1:00 am Nachmittag vor.} Hierzu bitte die beigefügte Anlage beachten Loshetze” Die gewischte Startzeit angaben. {4:30} 2. Den Sensor berittenen.
AUFSETZEN DES BARGUTS S03 Antriebshalterung c 1. Die DrehspieBhaiterung (A) von oben auf die Schrauben {C} an der linken Seite der Herd wand staken. 2. Den Drehspiel (D) mittig durch das Gasgut stecken und dieses in die Mitte des Spieles bringen, Die Zacken (E} der beiden Immaterialisierung in das Gasgut schaben und die Schrauben (F) fest anziehen. 3. Das Ende des Spieles (G} in die Antriebshalterung an der rechten Seite der Herdentier einfrieren.
| ~Tabelle fair Auftauen Lebensmittel " ersehe Verfahren i ! 3 Steaks, Inne Rande mit Folie abdecken. L B Koteletts Nahrungsmittel flach platzieren, wobei die differieren Teile i zur Mieze weisen, Wenn die Stricke zusammenkleben, möglichst bald zu trennen versuchen. i Wenn der Signalton ertönt, umdrehen, die warmen Teile ! abdecken und umordnen. : Nach der Aufbauzeit 10 his 15 Minuten stehen lassen. Gefällig 0.8 Aus der Originalverpackung nehmen. Fliegend Schenkelenden mit Folie abdecken.
GRILL-HEIZEINHEIT Die Grill-Heizeinheit kann zur Reinigung des Hitzereflektor und dar Dicke des Hemdinnenraums entrinnen: men warten. Hitzeflimmernd Griff-Heizelement {8} Richtig angeschossene Position der Heizeinheit {Siehe die umkreisten Stellen.} ENTFERNEN DER GRILL-HEIZEINHEIT Sicherstellen, dank die Grill-Heizeinheit und der Herd nicht seif sind.
PUNKTE ZUR ÜBERSPRUNGEN Vor Anforderung eines Kundenorientiertheit messen die folgenden Punkte (berieft werden. 1. Vergewissern Sie sich, dal die Schukosteckdose intakt ist. 2. Ein Glas Wasser in der Garnitur stellen und die TOr fest schliefen. Die Austrampele sollte nun, bei richtig geschlossener Herdentier, ausgehen. Das Grat auf 2 Minuten, Betrieb mit voller Leistung programmieren, Die folgenden Sensoren nachbarlichen: x2 A. Leuchtet die Gasraumlampe auf? JA NEIN. 8.