Operating instructions

GB-6
SETTING THE CLOCK
MICROWAVE POWER LEVELS
270 WATT = 30 % output
90 WATT = 10 % output
Your oven has 5 power levels. To choose the power level, follow the advice given in the recipe section.
900 WATT = 100 % output
630 WATT = 70 % output
450 WATT = 50 % output
To set the microwave power level:
1. Input the time by pressing the TIME keys.
2. Select the desired microwave power setting by pressing the MICROWAVE POWER LEVEL key.
If the MICROWAVE POWER LEVEL key is pressed once, “900W” (100 %) will be displayed.
If you miss your desired level, continue pressing the MICROWAVE POWER LEVEL key until you reach the
level again.
NOTE: If the power level is not selected, the level 900 W (100 %) is automatically set.
If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
5. If you do not set the clock, press the STOP key
once. “.0” will appear on the display. When the
operation of the oven is finished, “.0” will
reappear on the display instead of the time of day.
6. If you set the clock, energy save mode does not
work.
There are two setting modes: 12 hour clock and 24 hour clock.
x2
x3
1. Choose the 24 hour clock by
pressing the INFO/CLOCK
key 3 times.
2. Set the hours. Press the TIME keys
until the correct hour is displayed.
3. Change from hours to
minutes by pressing the
INFO/CLOCK key once.
Check the display.
4. Set the minutes. Press the TIME
keys until the correct minutes are
displayed.
5. Press the INFO/CLOCK
key once to start the clock.
NOTES:
1. Press the STOP key if you make a mistake during
programming.
2. If the oven is in cooking mode and you wish to
know the time of day, touch the INFO/CLOCK
key. As long as your finger is touching the key, the
time of day will be displayed.
3. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door. The display will show:
"ENERGY SAVE MODE TO GO OUT OF
ENERGY SAVE MODE SET CLOCK".
x3
x1
x1
1. To set the 12 hour clock, press
the INFO/CLOCK key twice,
as shown:
Example:
To set the 24 hour clock to 23:35:
2. To set the 24 hour clock, press
the INFO/CLOCK key 3 times,
as shown:
x2 x3
x3 x5
R-879_[EN].qxd 6/4/07 3:58 PM Page 6