Specifications

ProtoMat 95s/II
Manual
23
6.
Only those tools which have been previously assigned may be inserted in the tool
magazine.
The tools must be inserted as far as the stop and securely held between the springs.
Note: Tool position 1 is situated at the front to the right.
Caution
Ensure that the correct tool is inserted in the correct position.
The hood must be closed once the tools have been inserted.
7.
Once the hood has been closed, click on
T
OOL
B
OX DOWN
in the
T
OOL
P
OSITIONS
dialogue box in BoardMaster to lower the tool box.
8.
Continue at point 3.3 if you have not
assigned and inserted all tools in a single step.
First save your tool list.
3.4 After switching on
The machine moves to the x and y limit switches and remains in the coordinate zero-point
position. It now waits for commands from BoardMaster. If the equipment does not move
when it has been switched on, check the following:
1.
Is the POWER LED lit (only lights up after successful initialization)?
2.
Are all cables correctly inserted?
3.
You may need to check the power supply fuses.
3.5 Operating indicator on the LPKF
ProtoMat 95s/II
POWER (green): Control unit operating indicator. This only comes on when the system
has been initialized (limit switch reached).