Specifications

26
Manual
ProtoMat 95s/II
3.8 Checking and correcting the HOME position
The test file N
ULL
-P
KT
.LMD is supplied with the installation program to simplify the procedure
for checking the HOME position.
This program drills a hole on one side of the board and then rotates the board before milling
a circle in the same place. This allows you to perform a visual check on the position of the
H
OME
point on both axes.
Carry out the following steps:
1.
Make registration holes in double-sided board material.
2.
Secure the material and drilling base (2 mm) onto the base plate using the registration
hole pins. (see also the section entitled "Securing the board onto the machine bed").
3.
Start up BoardMaster and select
LMD
OR
LPR
from the
F
ILE
, I
MPORT
menu.
4.
Now select the file
NULL
-
PKT
.
LMD
and import it by clicking
OK
.
5.
Click on
to zoom the display and enclose the detail by clicking and dragging with
the left mouse button.