Specifications

ProtoMat 95s/II
Manual
71
7.9 Switching the device voltage,
electrical fuses
Caution
Make sure that the mains connector is removed before working on the fuses
or opening the device.
The LPKF ProtoMat 95s/II has both primary fuses and secondary fuses.
The main (primary) fuses (slow) are in the control unit power connection and can be
accessed from the outside.
Caution
Make sure that both fuses are replaced when switching to another line
voltage.
Both fuses must have the same rating.
Voltage setting and fuses
The secondary fuses are inside the control unit.
The control unit must be removed from the mechanism before replacing the fuses. Proceed
as described under "Removing the electronics unit".