Specifications

74
Manual
ProtoMat 95s/II
The secondary circuits are protected by microfuses (medium slow) as follows:
Fuse Type Power circuit
F701 3.15 A Power high level
F703 5.00 A +24 V at I/O-interface
F704 2.00 A +5V and VREF
F705 0.50 A RS 232 C/SerialPort1
The units are reassembled in the opposite order to that described above for disassembly.
CAUTION
Never confuse the cable for the stepping motor and the plotter head.
Always check that head and motor cables are connected correctly before switching on.
The fuses in the primary current circuit are in the power switch, which also contains the
mains filter and the power selector (e.g. 230 V/115 V).
Medium time-lag fuses must be used:
230V fused with 1.6A
115V fused with 3.15A