Installation Instructions

8
CHECK LIST FOR INSTALLATION
1. Make sure the unit has been installed according to all of the Installation Instructions, the Top Template and
Wall Template.
2. Remove all packing material from the oven.
3. Plug in the power cord.
4. Read the Operation Manual.
5. Keep the Installation Instructions for the local electrical inspector’s use.
ACCESSORIES
1. CHARCOAL FILTER (RK-230). Filter is used when hood exhaust is recirculated only. Check with your
dealer or order directly from the SHARP Accessories and Supplies Center. Call toll-free 1-800-642-2122.
2. FILLER PANEL KIT. This is available for use when the oven is installed in a 36” or 42” wide opening. The
metal filler panels come in pairs, each either 3 or 6 inches wide. For information and to purchase contact:
MODERN-AIRE VENTILATING CORPORATION
7319 Lankershim Blvd.
North Hollywood, CA 91605
Phone: [phone]
Fax: [phone]
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TINSEB229MRR0
Printed in U.S.A.
OPTIONAL TIP:
After removing oven from carton, flip carton upside
down, cut along indicated dotted line as shown below.
This will assist in positioning the oven before placing
oven on the Mounting Plate. See Figure 22.
Figure 22
5
1
/2"
5
1
/2"
5
1
/2"
11 "
2"