Installation Sheet

For any other assistance or information about this kit,

in USA please call Sharp’s Customer Assistance Center at

1-800-BE-SHARP (1-800-237-4277)

In Canada, call 905-568-7140

SHARP ELECTRONICS CORPORATION

1 Sharp Plaza Suite 1, Mahwah, New Jersey 07495-1123, U.S.A.

SHARP ELECTRONICS OF CANADA LTD.

335 Britannia Road East Mississauga, Ontario L4Z 1W9, Canada

C. CABINET INSTALLATION: Avoid pinching the cord

between the oven and the wall. Adjust the position of the

oven so that the feet of the oven are tted into the holes

of the Bottom Duct Assembly. See Figure 8.

DUCT RECESS

BOTTOM

DUCT

ASSEMBLY

FOOT

Figure 8

D. BACK FRAME INSTALLATION: Position back frame equal

space top to bottom, side to side. Mark for 4 holes, center

punch and pre-drill with 1/16" drill bit. Secure frame with 4

SCREWS (G). See Figure 9.

EQUAL GAP TOP, BOTTOM

EQUAL GAP

SIDE TO SIDE

MOUNTING HOLES

Figure 9

E. FRONT FRAME INSTALLATION: Place the FRONT FRAME

onto the BACK FRAME and align ball studs and receivers.

Secure the FRONT FRAME to the BACK FRAME by rmly

pushing the front frame onto the back frame engaging the

four (4) snap attachments. See Figure 10.

SNAP

ATTACHMENT

Figure 10