Operating instructions
OPTIMOD-AM DIGITAL INSTALLATION
2-49
If you are connecting directly to the Ethernet jack on a computer, use a
“crossover” or “reverse” Ethernet cable.
G) Press the N
EXT button.
2. Prepare the 9400 for modem connection through the serial port:
[Skip this step if you will not be using a modem connection.]
A) Navigate to S
ETUP > NETWORK & REMOTE.
B) Hold down the PC
CONNECT soft button and turn the knob until you see
M
ODEM on the display.
C) Press the M
ODEM INIT soft button.
D) If the string that appears in the display
is S0=4, this is correct. Press the
E
SCAPE button and skip steps (E) and (F) below.
S0=4 is the 9400 default setting. This activates auto-answer functionality
in the modem.
E) Set the InIT STRING to S0=4. Use the NEXT and PREV KEYs to move the cursor in
turn to each character in the modem initialization string. Use the knob to set
the character to the desired value. Repeat until you have set all the characters
in the initialization string.
F) Press the
SAVE soft button to confirm your setting.
3. Modem setup:
You will need two modems and two available phone lines, one for your PC and
one for your 9400. Orban Customer Service supports only the 3Com / U.S. Robot-
ics® 56kbps fax modem EXT on the 9400 side of your connection, although other
56kbps modems will usually work OK.
You can use either an internal or an external modem with your PC.
A) Connect the telephone line from the wall phone jack to the wall connection
icon on the back of the modem (modem in).
B) Connect the modem to the 9400’s serial port with a standard (not null) mo-
dem cable.
The cable provided with your 9400 is a null modem cable and will not
work.
C) Set the modem to AUTO ANSWER and turn it on.
For 3Com / U.S. Robotics® 56kbps fax modem EXT, set dipswitches 3, 5,
and 8 in the down position to activate the A
UTO ANSWER setting. All other
dipswitches should be set to the up position.
4. Prepare the 9400 for direct serial connection through the serial port:
[Skip this step if you will not be using a modem connection.]
A) Navigate to S
ETUP > NETWORK & REMOTE.