Operating instructions

2-80
INSTALLATION ORBAN MODEL 9400
e) Set “Maximum speed
(bps)” to “115200.”
f) Check “Enable hardware
flow control.”
g) Check “Enable modem
error control.”
h) Check “Enable mcdem
compression.”
i) Make sure that no other
box is checked.
j) Click “OK.”
k) Select the Networking
tab.
l) Make sure that “PPP:
Windows 95 / 98 / NT4 /
2000, Internet” ap–
pears in the “Type of
dial-up server I am
calling” field.
m)Make sure that “Inter-
net Protocol (TCP/IP) is
checked.
You may leave “Cli-
ent for Microsoft
Networks” checked
if you like.
n) Click “OK.”
o) When the “Connection
properties” window ap-
pears, click “OK.”
2. Launch an existing Windows XP modem connection.
Once you have set up a “connection” specifying a modem connection in the 9400
PC Remote application (see To set up a new connection on page 3-61), choosing
this connection from 9400 PC Remote automatically
opens a Windows modem
connection to your 9400.