Operating instructions

2-42
INSTALLATION ORBAN MODEL 9400
 Exit Test (restores the operating preset that was on-air before a test
mode was invoked)
 No function
F) When you have programmed an event to your satisfaction, press the S
AVE
EVENT button.
You will return to the automation menu.
4. To edit an existing event:
A) Press the V
IEW > EDIT EVENT button.
You can search by date or event (e.g., recalling a given preset). Use the
N
EXT button to navigate between DATE and EVENT.
B) Turn the knob until you see the event you wish to edit.
C) Press the E
DIT EVENT button.
D) Edit the event as desired. Use the same technique as adding an event.
See step 3 on page 2-40.
E) Press the SAVE EVENT button to store your edits.
5. To delete an event:
A) Press the D
ELETE EVENT button.
B) Choose the event to delete with the knob.
C) When you have located the event you want to remove, press the D
ELETE
EVENT button.
This action will immediately delete the event. There is no “are you sure”
warning message. To abort the deletion, press the E
SC button, not the
D
ELETE EVENT button.
Security and Passcode Programming
[Skip this step if you do not plan to use PC Remote software or do not plan to lock
out the front panel locally.]
The 9400 has five levels of security to prevent unauthorized people from changing
its programming or operating state. Security controls access to the front panel and
to anyone connecting to the 9400 through a direct serial connection, dial-up net-
working (through modems), or its Ethernet port.
The security levels are:
1. All Access (i.e., administrator level)