Operating instructions

2-44
INSTALLATION ORBAN MODEL 9400
If the front panel is already password protected, you can only access this
screen by entering a passcode with A
LL ACCESS privileges.
B) Turn the knob until you see the passcode you want to edit.
C) Press the N
EXT button. The Permissions screen appears.
D) Turn the knob to set the desired permission level for the passcode you are ed-
iting.
E) Press the N
EXT button to confirm your choice.
Your new permission level is stored and the Security menu appears.
To Delete a Passcode:
A) Navigate to SETUP > SECURITY > DELETE PASSCODES.
If the front panel is already password protected, you can only access this
screen by entering a passcode with All Access privileges.
B) Turn the knob until you see the passcode you want to delete.
C) Press the N
EXT button. The Confirm Delete screen appears.
D) Press the Y
ES soft button to delete the passcode. Press the NO or ESCAPE
buttons to abort deleting the passcode.
To Lock the Front Panel Immediately:
After you have adjusted the processor, to maximize security you will often want
to lock it immediately without waiting for the timeout. To do so:
A) Press the S
ETUP button.
B) If the L
OCK NOW soft button is not visible, press the NEXT button until you see
it.
C) Press the L
OCK NOW soft button.
To Program local lockout:
A) Navigate to SETUP > SECURITY.
If the front panel is already password protected, you can only access this
screen by entering a passcode with A
LL ACCESS privileges.
B) Hold down the AUTOLOCK soft button and turn the knob to set the desired
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 1 min-
ute to 8 hours, or O
FF. This is the time delay between the last access to a
local front panel control and when the front panel automatically locks it-
self out, requiring entering a passcode to obtain front panel control of
the 9400.